Mon–Fri 9am–5pm · (902) 755-6532

Diagnostic Lookup

Harley-Davidson Trouble Codes

Search 371 Harley-Davidson diagnostic trouble codes (DTCs). Each code explains what the fault means, the usual causes, what to check first, and whether it's safe to keep riding.

Powertrain (P)
Engine, fuel, ignition and throttle codes set by the ECM.
102 codes
Chassis (C)
ABS and linked-brake codes set by the ABS module.
37 codes
Body (B)
Security, lighting, instruments, infotainment and hand-control codes.
209 codes
Network (U)
Communication faults between modules on the data network.
23 codes

371 codes

How to read codes on your Harley

Most fuel-injected Harleys from 2004 on can show stored codes on the speedometer without a scan tool:

  1. Hold the odometer/trip button in and turn the ignition on.
  2. Release the button when the gauge lighting comes on. The display enters diagnostic mode.
  3. Tap the button to step through each module. Modules with nothing stored show "none".
  4. On 2014 and later Touring models, use the left hand-control toggle instead of the odometer button.

Newer bikes name each module (ECM, BCM, ABS, speedometer, radio). Older ones use letters, such as P for the engine module and B for ABS.

Current or historic? Clear the codes, ride the bike, then check again. A code that comes back is a current fault. One that doesn't was historic. Historic codes also clear themselves after about 40 trouble-free ignition cycles. The exact procedure varies by model and year, so check your owner's or service manual.

Code you can't sort out?

Arch Customs reads and diagnoses Harley-Davidson EFI, ABS and electrical faults with proper diagnostic equipment, at our shop in Stellarton, Nova Scotia.

Book a diagnostic scan

Code descriptions are based on Harley-Davidson diagnostic code lists published by Fuel Moto and Haynes. Code meanings can vary by model year and module. Always confirm with your service manual or a qualified technician.

(902) 755-6532
Book Service