Powertrain (P) · ECM
Harley Code P0505
Idle speed control unstable
Ride with caution
What P0505 means
The ECM couldn't keep the idle speed stable.
Common causes
- →A dirty throttle body or idle air passage
- →A vacuum leak
- →A tune that doesn't match the parts on the bike
What to check first
- Clean the throttle body
- Check for intake leaks
- Confirm the tune matches your modifications
Is it safe to ride?
Usually rideable, but the bike may stall at stops. Get it checked.
How to read codes on your Harley
Most fuel-injected Harleys from 2004 on can show stored codes on the speedometer without a scan tool:
- Hold the odometer/trip button in and turn the ignition on.
- Release the button when the gauge lighting comes on. The display enters diagnostic mode.
- Tap the button to step through each module. Modules with nothing stored show "none".
- On 2014 and later Touring models, use the left hand-control toggle instead of the odometer button.
Newer bikes name each module (ECM, BCM, ABS, speedometer, radio). Older ones use letters, such as P for the engine module and B for ABS.
Current or historic? Clear the codes, ride the bike, then check again. A code that comes back is a current fault. One that doesn't was historic. Historic codes also clear themselves after about 40 trouble-free ignition cycles. The exact procedure varies by model and year, so check your owner's or service manual.