Mon–Fri 9am–5pm · (902) 755-6532

Powertrain (P) · ECM

Harley Code P1009

Fuel disabled due to incorrect security password

Don't ride until it's checked

What P1009 means

The ECM disabled fuel because the security system password was wrong or missing, usually after a module replacement or a fob or security system problem.

Common causes

  • →A key fob battery or fob communication problem
  • →A replaced or unpaired security module or ECM
  • →Communication faults between modules

What to check first

  1. Replace the fob battery
  2. Check for communication (U) codes
  3. Have the modules paired or the password reset by a technician

Is it safe to ride?

The bike won't run normally until the security system is resolved.

Related security system and password codes

How to read codes on your Harley

Most fuel-injected Harleys from 2004 on can show stored codes on the speedometer without a scan tool:

  1. Hold the odometer/trip button in and turn the ignition on.
  2. Release the button when the gauge lighting comes on. The display enters diagnostic mode.
  3. Tap the button to step through each module. Modules with nothing stored show "none".
  4. On 2014 and later Touring models, use the left hand-control toggle instead of the odometer button.

Newer bikes name each module (ECM, BCM, ABS, speedometer, radio). Older ones use letters, such as P for the engine module and B for ABS.

Current or historic? Clear the codes, ride the bike, then check again. A code that comes back is a current fault. One that doesn't was historic. Historic codes also clear themselves after about 40 trouble-free ignition cycles. The exact procedure varies by model and year, so check your owner's or service manual.

(902) 755-6532
Book Service