Arch Customs

Our Services

Comprehensive Harley-Davidson and American motorcycle repair, plus Can-Am ATV/UTV and Ski-Doo snowmobile service, and custom paint, bodywork, and hydrodipping. Every job is quoted before work begins — no surprises.

Book a Service Call (902) 755-6532

Engine Service6 Fuel System6 Primary & Transmission5 Brakes & Suspension8 Electrical & Diagnostics7 Seasonal & Maintenance6 ATV & UTV Repair5 Snowmobile Service5 Paint, Body & Custom Graphics4

Engine Service

Top End Rebuild

Cylinder heads, rings, pistons, valve train, and full gasket set. Covers all Harley Big Twin and Sportster engines.

Details →

Full Engine Rebuild

Complete engine disassembly including cases, crankshaft, bearings, cams, and full top end. The definitive solution for worn-out engines.

Details →

Cam Chain Tensioner Upgrade (Twin Cam)

Proactive upgrade from worn shoe-style to hydraulic tensioners before failure. Includes cam cover gaskets and full cam chest inspection.

Details →

Compensating Sprocket Replacement

Remove and replace the worn rubber-damped compensating sprocket that causes the classic Twin Cam throttle-clunk. OEM or solid upgraded unit available.

Details →

Head Gasket Replacement

Cylinder head removal, deck inspection, head gasket and rocker box gasket replacement. Includes pushrod tube seals.

Details →

Cam Upgrade (Stage 2)

Aftermarket cam installation for increased power and torque. Includes tensioner service on Twin Cam engines. Cam selection consultation included.

Details →

Fuel System

Carburetor Rebuild & Tune (CV)

Complete Keihin CV carburetor rebuild with jet consultation, pilot screw tuning, and idle synchronization.

Details →

Carburetor Jet Kit Install

Main jet, pilot jet, and needle clip repositioning to match air cleaner and exhaust modifications for carbureted Harleys.

Details →

Fuel Injector Cleaning

Professional ultrasonic injector cleaning with flow rate testing before and after. Restores atomization and fuel delivery accuracy.

Details →

EFI Fuel Mapping / Stage 1 Tune

Download or piggyback fuel map update to match a Stage 1 air cleaner and exhaust combination on EFI Harleys.

Details →

Dyno Tune

Full dynamometer session with custom ECM mapping. Required for Stage 2 and Stage 3 builds for accurate power, torque, and drivability optimization.

Details →

Fuel System Flush

Professional in-system fuel injector and fuel line flush with professional-grade cleaning solution. Includes fuel filter inspection.

Details →

Primary & Transmission

Primary Service

Primary oil drain and fill, chain slack check and adjustment, derby cover removal, and clutch visual inspection.

Details →

Clutch Rebuild

Full clutch plate replacement — friction discs, steel plates, and springs — with internal release adjustment.

Details →

Clutch Cable Replacement

Clutch cable removal, replacement with correct-length unit, and full cable and lever adjustment.

Details →

Transmission Oil Service

Transmission drain and fill with fresh gear oil, level check, and inspection for external leaks.

Details →

Transmission Rebuild

Full gearbox disassembly, shift fork inspection, bearing replacement, and reassembly. Addresses false neutrals, hard shifting, and gear engagement issues.

Details →

Brakes & Suspension

Brake Pad Replacement (Front or Rear)

Pad removal and replacement with caliper inspection, piston retraction, and brake system test.

Details →

Brake Rotor Replacement

Rotor removal and replacement with simultaneous pad replacement, caliper inspection, and brake system test.

Details →

Brake Fluid Flush & Bleed

Full DOT 4 brake fluid replacement with system bleeding. Removes moisture-contaminated fluid from front and rear systems.

Details →

ABS Brake Service

ABS-compatible brake pad and fluid service using professional scan tools for ABS modulator bleeding on equipped models.

Details →

Fork Oil Change

Fork leg removal, drain, and refill with fresh oil at your preferred viscosity. Includes dust seal and bushing inspection.

Details →

Fork Seal Replacement

Fork leg removal, seal replacement with new OEM-spec seals, and refill with fresh fork oil.

Details →

Rear Shock Installation

Remove and replace rear shocks with aftermarket units. Spring preload setup and ride height check included.

Details →

Suspension Setup Consultation

Sag measurement with rider on the bike, preload adjustment, and riding position and load assessment.

Details →

Electrical & Diagnostics

Diagnostic Scan (EFI / ABS)

Full system scan with Harley-compatible professional tools. All DTCs read across engine, ABS, TSSM, and instrument cluster modules.

Details →

Battery Load Test

Professional carbon-pile battery load test to assess true battery health under cranking conditions.

Details →

Battery Replacement

Battery removal and replacement with correct-spec AGM unit. Includes charging system verification and ECM relearn.

Details →

Charging System Diagnosis

Stator output measurement, rotor inspection, and voltage regulator output testing to identify charging system faults.

Details →

Stator / Regulator Replacement

Stator or voltage regulator replacement after confirmed diagnosis. Includes primary disassembly for stator access.

Details →

Wiring Repair

Harness inspection, connector cleaning and repair, chafe damage repair, and ground restoration. Charged per hour with written diagnosis first.

Details →

Electronic Ignition Conversion

Points-to-electronic ignition conversion for Shovelhead, Ironhead, and vintage engines. Eliminates points adjustment permanently.

Details →

Seasonal & Maintenance

Spring Pre-Season Service

Complete inspection and service to get your Harley road-ready after winter. Oil change, tire check, brake inspection, fluid levels, lights, and controls.

Details →

Winterization Service

Complete winter storage preparation — oil change, fuel stabilization, battery disconnect/prep, corrosion protection, and storage checklist.

Details →

Tire Mounting & Balancing

Wheel removal, tire mounting, static balance, and reinstall. Available for all Harley-Davidson Big Twin and Sportster wheel sizes.

Details →

Safety Inspection

Pre-trip safety check covering tires, brakes, lights, controls, fluid levels, and chain or belt. Written pass/fail report.

Details →

Air Cleaner Upgrade Install

High-flow air cleaner installation with backing plate, breather re-route, and carburetor/EFI consultation for required tuning.

Details →

Exhaust System Install

Slip-on or full exhaust system installation with correct torque sequence, heat shield fitting, and carburetor/EFI tuning consultation.

Details →

ATV & UTV Repair

ATV & UTV Oil Change & Filter Service

Engine oil and filter change for Can-Am, Polaris, Arctic Cat, and Yamaha ATVs and UTVs, with drive belt housing inspection and fluid level check.

Details →

CV Axle & Half-Shaft Replacement

Front or rear CV axle replacement for Can-Am, Polaris, and other ATV/UTV models — the most common four-wheeler drivetrain repair we see.

Details →

CVT Belt & Clutch Service

Drive belt inspection and replacement, primary and secondary clutch cleaning, and roller/spring inspection for Can-Am and other CVT-equipped ATVs and UTVs.

Details →

ATV & UTV Suspension & Shock Service

Shock rebuild, bushing replacement, and sway bar/tie rod inspection for Can-Am and other ATV/UTV suspension systems.

Details →

ATV & UTV Electrical & Winch Diagnostics

Battery, charging system, and winch diagnostics for Can-Am and other ATVs/UTVs, using professional scan tools where equipped.

Details →

Snowmobile Service

Pre-Season Prep & Track Inspection

Full pre-winter inspection for Ski-Doo and other snowmobiles — track, suspension, belt, fluids, and starting system checked before first snow.

Details →

Snowmobile Clutch & Belt Service

Primary and secondary clutch cleaning, spring and weight inspection, and drive belt replacement for Ski-Doo and other snowmobiles.

Details →

Snowmobile Carburetor & EFI Tuning

Carburetor rebuild and jetting or EFI fuel map tuning for Ski-Doo and other snowmobiles, matched to elevation and typical riding temperature.

Details →

Track, Suspension & Hyfax Service

Track tension and alignment, slide rail hyfax replacement, and rear suspension inspection for Ski-Doo and other snowmobiles.

Details →

Post-Season Storage & Summerization

Fuel stabilization, fogging, battery removal, and track relief for Ski-Doo and other snowmobiles going into summer storage.

Details →

Paint, Body & Custom Graphics

Motorcycle Paint & Refinishing

Full-panel or full-bike repaint with proper prep, color matching, and clear coat — tanks, fenders, fairings, and frames.

Details →

Bodywork & Fairing Repair

Dent repair, plastic fairing crack repair, and fiberglass bodywork — the prep work behind every good paint job, and a standalone repair on its own.

Details →

Hydrodipping & Hydro Graphics

Water transfer printing (hydrodipping) for tanks, fenders, wheels, and helmets — carbon fiber, camo, wood grain, and custom pattern films.

Details →

Custom Graphics, Pinstriping & Decals

Vinyl graphics, hand pinstriping, custom lettering, and decal work — finish off a repaint or refresh factory graphics that have faded or peeled.

Details →

Note: Every job is different — final pricing depends on model year, parts required, and any additional issues found during inspection. We always provide a written quote before proceeding, so you know the cost before we touch your bike. Parts sourced from OEM Harley-Davidson, Screamin' Eagle, S&S, James Gaskets, and other proven suppliers.