Mon–Fri 9am–5pm · (902) 755-6532

Cam Comparison

Harley-Davidson Cam Comparison Chart

56 cams from Wood, S&S, Feuling, Andrews, Screamin' Eagle, Red Shift and Cycle-Rama, compared as Stage 2 builds on the same Stage 1 parts: a high-flow air cleaner, 2-into-1 exhaust and custom tune. Click any cam for its gains on every engine it fits, or build your own combination in the horsepower calculator.

Milwaukee-Eight Cams

Estimated rear-wheel output on a Milwaukee-Eight 114 (≈ 96 hp / 122 ft-lb with intake, exhaust and tune, before the cam). The 121 VVT isn't included, since most aftermarket cams don't fit VVT engines.

CamCharacterEst. hpEst. ft-lbGain over no cam
Screamin' Eagle SE8-517Top-end power110130+14 hp / +8 ft-lb
S&S Cycle 550CTop-end power110130+14 hp / +8 ft-lb
Wood Performance WM8-777Top-end power109131+13 hp / +9 ft-lb
S&S Cycle 590CTop-end power109127+13 hp / +5 ft-lb
Feuling Reaper 592Top-end power109127+13 hp / +5 ft-lb
Screamin' Eagle SE8-511Mid-range108131+12 hp / +9 ft-lb
Feuling Reaper 508Mid-range108131+12 hp / +9 ft-lb
Wood Performance WM8-222Mid-range107132+11 hp / +10 ft-lb
S&S Cycle 475CMid-range107132+11 hp / +10 ft-lb
Feuling Reaper 521Low-end torque106132+10 hp / +10 ft-lb
Cycle-Rama CR-460Mid-range106132+10 hp / +10 ft-lb
Wood Performance WM8-22XLow-end torque105133+9 hp / +11 ft-lb
Screamin' Eagle SE8-462Low-end torque105132+9 hp / +10 ft-lb
Andrews M460Low-end torque105132+9 hp / +10 ft-lb
Zipper's Red Shift 468Mid-range105131+9 hp / +9 ft-lb

Twin Cam Cams

Estimated rear-wheel output on a Twin Cam 103 (≈ 85 hp / 99 ft-lb with intake, exhaust and tune, before the cam). Calibrated against Fuel Moto's Twin Cam 103 cam shootout.

CamCharacterEst. hpEst. ft-lbGain over no cam
Wood Performance TW-999-6aTop-end power98110+13 hp / +11 ft-lb
Wood Performance TW-777Mid-range97110+12 hp / +11 ft-lb
S&S Cycle 570Mid-range97108+12 hp / +9 ft-lb
Wood Performance TW-222Low-end torque96109+11 hp / +10 ft-lb
Wood Performance TW-555Mid-range96110+11 hp / +11 ft-lb
S&S Cycle MR103All-round96110+11 hp / +11 ft-lb
S&S Cycle 585Top-end power96106+11 hp / +7 ft-lb
Feuling 574Top-end power96106+11 hp / +7 ft-lb
Screamin' Eagle SE-259EMid-range96106+11 hp / +7 ft-lb
Feuling 525Low-end torque95105+10 hp / +6 ft-lb
Feuling 543Mid-range95107+10 hp / +8 ft-lb
Andrews 57HMid-range95107+10 hp / +8 ft-lb
Andrews TW37Mid-range95106+10 hp / +7 ft-lb
Andrews 48HLow-end torque94109+9 hp / +10 ft-lb
Zipper's Red Shift 527Low-end torque94108+9 hp / +9 ft-lb
Zipper's Red Shift 575Mid-range94108+9 hp / +9 ft-lb
Cycle-Rama 570-2Low-end torque94109+9 hp / +10 ft-lb
Cycle-Rama 575Mid-range94107+9 hp / +8 ft-lb
S&S Cycle 583Low-end torque92108+7 hp / +9 ft-lb
S&S Cycle 551Low-end torque91109+6 hp / +10 ft-lb
Andrews TW26Low-end torque91106+6 hp / +7 ft-lb
Screamin' Eagle SE-204Low-end torque91106+6 hp / +7 ft-lb
Screamin' Eagle SE-255Low-end torque91106+6 hp / +7 ft-lb
Zipper's Red Shift 525Low-end torque89108+4 hp / +9 ft-lb

Evolution Big Twin Cams

Estimated rear-wheel output on a Evolution 80 (Big Twin) (≈ 65 hp / 74 ft-lb with intake, exhaust and tune, before the cam).

CamCharacterEst. hpEst. ft-lbGain over no cam
S&S Cycle 640Top-end power7576+10 hp / +2 ft-lb
Andrews EV46Mid-range7379+8 hp / +5 ft-lb
Andrews EV51Top-end power7377+8 hp / +3 ft-lb
S&S Cycle 561Top-end power7377+8 hp / +3 ft-lb
Feuling Reaper 543Mid-range7379+8 hp / +5 ft-lb
S&S Cycle 508Mid-range7279+7 hp / +5 ft-lb
Feuling Reaper 518Low-end torque7280+7 hp / +6 ft-lb
Andrews EV27Low-end torque7181+6 hp / +7 ft-lb
Andrews EV13Low-end torque6980+4 hp / +6 ft-lb

Sportster (Evolution) Cams

Estimated rear-wheel output on a Sportster 1200 (Evolution) (≈ 66 hp / 74 ft-lb with intake, exhaust and tune, before the cam).

CamCharacterEst. hpEst. ft-lbGain over no cam
Andrews N8Top-end power7778+11 hp / +4 ft-lb
Andrews N4Mid-range7480+8 hp / +6 ft-lb
Andrews N2Low-end torque7279+6 hp / +5 ft-lb

Shovelhead Cams

Estimated rear-wheel output on a Shovelhead 80 (≈ 51 hp / 61 ft-lb with intake, exhaust and tune, before the cam).

CamCharacterEst. hpEst. ft-lbGain over no cam
Andrews B GrindMid-range5665+5 hp / +4 ft-lb
Andrews A GrindLow-end torque5565+4 hp / +4 ft-lb

Indian Thunder Stroke Cams

Estimated rear-wheel output on a Indian Thunder Stroke 111 (≈ 82 hp / 115 ft-lb with intake, exhaust and tune, before the cam).

CamCharacterEst. hpEst. ft-lbGain over no cam
Andrews TS570Mid-range91120+9 hp / +5 ft-lb
Indian Motorcycle Stage 2 Performance CamsMid-range88120+6 hp / +5 ft-lb
Andrews TS550Low-end torque88122+6 hp / +7 ft-lb

Choosing a Harley Cam

What is the best cam for a Milwaukee-Eight?

It depends on how you ride. For heavy touring and two-up riding, torque grinds like the Wood WM8-22X, Screamin' Eagle SE8-462 or Andrews M460 pull hardest down low. For more top-end power, grinds like the SE8-517, S&S 550C or Feuling Reaper 592 make more peak horsepower, especially with more displacement.

What is the best cam for a Twin Cam 103?

In Fuel Moto's back-to-back Twin Cam 103 test, the Wood TW-999-6a made the most peak horsepower, and it tied with the S&S MR103 for the most torque. For heavy touring bikes, torque-focused grinds like the Wood TW-222 and Andrews 48H are popular bolt-in choices.

What's the difference between a torque cam and a top-end cam?

A torque cam closes the intake valve earlier, which builds cylinder pressure at low rpm for strong pull off the line and easy two-up riding. A top-end cam holds the valves open longer, so the engine breathes better at high rpm and makes more peak horsepower, at the cost of some low-end grunt.

What do I need with a new cam?

A tune is required on fuel-injected bikes. Twin Cams should get hydraulic cam chain tensioners while the cam chest is open. Adjustable pushrods make the install easier, and a high-flow intake and 2-into-1 exhaust let the cam make its full power.

Estimates for healthy engines. Real results depend on condition, the rest of the build, the tune and the dyno. Fitment varies by model year; we confirm compatibility before ordering.

(902) 755-6532
Book Service