Mon–Fri 9am–5pm · (902) 755-6532

Body (B) · BCM

Harley Code B2235

Fork lock configuration invalid

Ride with caution

What B2235 means

The fork lock sensor or configuration reported a problem.

Common causes

  • →A failed fork lock sensor
  • →Wiring damage
  • →Incorrect BCM configuration

What to check first

  1. Make sure the fork lock is fully released
  2. Inspect the sensor wiring

Is it safe to ride?

Make sure the steering turns freely before riding.

How to read codes on your Harley

Most fuel-injected Harleys from 2004 on can show stored codes on the speedometer without a scan tool:

  1. Hold the odometer/trip button in and turn the ignition on.
  2. Release the button when the gauge lighting comes on. The display enters diagnostic mode.
  3. Tap the button to step through each module. Modules with nothing stored show "none".
  4. On 2014 and later Touring models, use the left hand-control toggle instead of the odometer button.

Newer bikes name each module (ECM, BCM, ABS, speedometer, radio). Older ones use letters, such as P for the engine module and B for ABS.

Current or historic? Clear the codes, ride the bike, then check again. A code that comes back is a current fault. One that doesn't was historic. Historic codes also clear themselves after about 40 trouble-free ignition cycles. The exact procedure varies by model and year, so check your owner's or service manual.

(902) 755-6532
Book Service