Mon–Fri 9am–5pm · (902) 755-6532

Powertrain (P) · ECM

Harley Code P1608

Loss of continuous battery

Usually safe to ride

What P1608 means

The ECM lost its constant battery feed, usually because the battery was disconnected or a fuse or connection failed.

Common causes

  • →A disconnected or replaced battery
  • →A loose battery terminal
  • →A blown fuse in the constant battery circuit

What to check first

  1. Check battery terminals and the main fuse
  2. Clear the code and see if it returns

Is it safe to ride?

Often set harmlessly after battery work. If it returns on its own, check the connections.

How to read codes on your Harley

Most fuel-injected Harleys from 2004 on can show stored codes on the speedometer without a scan tool:

  1. Hold the odometer/trip button in and turn the ignition on.
  2. Release the button when the gauge lighting comes on. The display enters diagnostic mode.
  3. Tap the button to step through each module. Modules with nothing stored show "none".
  4. On 2014 and later Touring models, use the left hand-control toggle instead of the odometer button.

Newer bikes name each module (ECM, BCM, ABS, speedometer, radio). Older ones use letters, such as P for the engine module and B for ABS.

Current or historic? Clear the codes, ride the bike, then check again. A code that comes back is a current fault. One that doesn't was historic. Historic codes also clear themselves after about 40 trouble-free ignition cycles. The exact procedure varies by model and year, so check your owner's or service manual.

(902) 755-6532
Book Service