Mon–Fri 9am–5pm · (902) 755-6532

Chassis (C) · ABS

Harley Code C1076

Front linked outlet valve error

Ride with caution

What C1076 means

An ABS hydraulic unit valve or solenoid circuit failed its self-check. Some codes apply to linked-brake systems.

Common causes

  • →An internal hydraulic unit fault
  • →Old or contaminated brake fluid
  • →An electrical fault at the module connector

What to check first

  1. Inspect the ABS module connector
  2. Check brake fluid condition
  3. Have the ABS unit tested with factory-level diagnostics

Is it safe to ride?

ABS may be disabled. Have the brakes checked before riding further.

How to read codes on your Harley

Most fuel-injected Harleys from 2004 on can show stored codes on the speedometer without a scan tool:

  1. Hold the odometer/trip button in and turn the ignition on.
  2. Release the button when the gauge lighting comes on. The display enters diagnostic mode.
  3. Tap the button to step through each module. Modules with nothing stored show "none".
  4. On 2014 and later Touring models, use the left hand-control toggle instead of the odometer button.

Newer bikes name each module (ECM, BCM, ABS, speedometer, radio). Older ones use letters, such as P for the engine module and B for ABS.

Current or historic? Clear the codes, ride the bike, then check again. A code that comes back is a current fault. One that doesn't was historic. Historic codes also clear themselves after about 40 trouble-free ignition cycles. The exact procedure varies by model and year, so check your owner's or service manual.

(902) 755-6532
Book Service