Powertrain (P) · ECM
Harley Code P1475
Exhaust actuator position error
What P1475 means
On models with an active exhaust valve, the actuator that controls it isn't reaching its commanded position, or its circuit is open or shorted.
Common causes
- →A seized exhaust valve or actuator cable
- →A failed actuator
- →Aftermarket exhaust installed without a delete or tune
What to check first
- Check the actuator cables and valve movement
- Inspect the actuator connector
- Confirm the tune is set up for an aftermarket exhaust
Is it safe to ride?
Usually rideable. It mostly affects sound and emissions.
Related exhaust actuator (exhaust valve) codes
How to read codes on your Harley
Most fuel-injected Harleys from 2004 on can show stored codes on the speedometer without a scan tool:
- Hold the odometer/trip button in and turn the ignition on.
- Release the button when the gauge lighting comes on. The display enters diagnostic mode.
- Tap the button to step through each module. Modules with nothing stored show "none".
- On 2014 and later Touring models, use the left hand-control toggle instead of the odometer button.
Newer bikes name each module (ECM, BCM, ABS, speedometer, radio). Older ones use letters, such as P for the engine module and B for ABS.
Current or historic? Clear the codes, ride the bike, then check again. A code that comes back is a current fault. One that doesn't was historic. Historic codes also clear themselves after about 40 trouble-free ignition cycles. The exact procedure varies by model and year, so check your owner's or service manual.