Andrews · Low-end torque
Andrews TS550 Cam: Horsepower & Torque Gains
Bolt-in Thunder Stroke grind: .550" lift, 218°/222° duration.
This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.
Estimated Gains by Engine
Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Andrews TS550, which makes it a Stage 2 build.
| Engine | Stock | Stage 1 | Stage 2 with TS550 | Try it |
|---|---|---|---|---|
| Indian Thunder Stroke 111 | 74 hp / 106 ft-lb | 82 hp / 115 ft-lb | 88 hp / 122 ft-lb | Open in calculator → |
| Indian Thunder Stroke 116 | 85 hp / 116 ft-lb | 94 hp / 126 ft-lb | 101 hp / 133 ft-lb | Open in calculator → |
Supporting Mods for the Andrews TS550
- Recommended: A heavy-duty clutch spring. At around 122 ft-lb the stock clutch may start to slip.
Andrews TS550 FAQ
How much horsepower does the Andrews TS550 add in a Stage 2 build?
On a Stage 1 Indian Thunder Stroke 111 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Andrews TS550 adds about 6 hp and 7 ft-lb at the rear wheel, for a Stage 2 build of roughly 88 hp / 122 ft-lb.
What engines does the Andrews TS550 fit?
The Andrews TS550 is listed for the Indian Thunder Stroke 111 and Indian Thunder Stroke 116. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.
Does the Andrews TS550 need a tune?
Yes. On a carbureted engine, plan on re-jetting or a performance carb, and a programmable ignition helps match timing to the new cam.
Is the Andrews TS550 a good cam for me?
This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.
Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.
Install the Andrews TS550
Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.
Build it in the calculatorRequest a quote