Mon–Fri 9am–5pm · (902) 755-6532

Andrews · Top-end power

Andrews EV51 Cam: Horsepower & Torque Gains

Hotter grind for built, higher-compression Evos.

This is a top-end grind. It gives up some bottom-end grunt to make more power at higher rpm, and it rewards riders who like to rev the engine out.

Engine
Evolution 80 (Big Twin)
Est. output
73 hp
77 ft-lb
Gain
+8 hp
+3 ft-lb
Rank
#3 hp
#7 torque of 9

Estimated Gains by Engine

Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Andrews EV51, which makes it a Stage 2 build.

EngineStockStage 1Stage 2 with EV51Try it
Evolution 80 (Big Twin)57 hp / 68 ft-lb65 hp / 74 ft-lb73 hp / 77 ft-lbOpen in calculator →

Supporting Mods for the Andrews EV51

  • Consider: This grind makes its best power with more displacement or compression, so it's usually paired with a big bore kit.
  • Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
  • Consider: The Andrews EV51 makes its best power with more displacement or compression. A milder grind may suit a 80 ci engine better.
  • Consider: A programmable ignition so timing can be matched to the new cam.

Andrews EV51 vs Similar Cams

Other top-end power grinds on the Evolution 80 (Big Twin), same supporting parts.

Full Harley cam comparison chart →

Andrews EV51 FAQ

How much horsepower does the Andrews EV51 add in a Stage 2 build?

On a Stage 1 Evolution 80 (Big Twin) (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Andrews EV51 adds about 8 hp and 3 ft-lb at the rear wheel, for a Stage 2 build of roughly 73 hp / 77 ft-lb.

What engines does the Andrews EV51 fit?

The Andrews EV51 is listed for the Evolution 80 (Big Twin). Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.

Does the Andrews EV51 need a tune?

Yes. On a carbureted engine, plan on re-jetting or a performance carb, and a programmable ignition helps match timing to the new cam.

Is the Andrews EV51 a good cam for me?

This is a top-end grind. It gives up some bottom-end grunt to make more power at higher rpm, and it rewards riders who like to rev the engine out. It works best with more displacement or compression, so it's usually paired with a big bore kit or a higher-compression build.

Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.

Install the Andrews EV51

Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.

Build it in the calculatorRequest a quote
(902) 755-6532
Book Service