Mon–Fri 9am–5pm · (902) 755-6532

Andrews · Low-end torque

Andrews M460 Cam: Horsepower & Torque Gains

Broad power that comes on early. Great for heavy baggers.

This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.

Engine
M8 114
Est. output
105 hp
132 ft-lb
Gain
+9 hp
+10 ft-lb
Rank
#14 hp
#7 torque of 15

Estimated Gains by Engine

Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Andrews M460, which makes it a Stage 2 build.

EngineStockStage 1Stage 2 with M460Try it
Milwaukee-Eight 10778 hp / 101 ft-lb88 hp / 111 ft-lb97 hp / 120 ft-lbOpen in calculator →
Milwaukee-Eight 11485 hp / 111 ft-lb96 hp / 122 ft-lb105 hp / 132 ft-lbOpen in calculator →
Milwaukee-Eight 11793 hp / 116 ft-lb105 hp / 128 ft-lb115 hp / 138 ft-lbOpen in calculator →
Milwaukee-Eight 117 High Output103 hp / 118 ft-lb112 hp / 126 ft-lb123 hp / 136 ft-lbOpen in calculator →
CVO Milwaukee-Eight 11793 hp / 116 ft-lb105 hp / 128 ft-lb115 hp / 138 ft-lbOpen in calculator →

Supporting Mods for the Andrews M460

  • Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
  • Recommended: A heavy-duty clutch spring. At around 132 ft-lb the stock clutch may start to slip.

Andrews M460 FAQ

How much horsepower does the Andrews M460 add in a Stage 2 build?

On a Stage 1 Milwaukee-Eight 114 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Andrews M460 adds about 9 hp and 10 ft-lb at the rear wheel, for a Stage 2 build of roughly 105 hp / 132 ft-lb.

What engines does the Andrews M460 fit?

The Andrews M460 is listed for the Milwaukee-Eight 107, Milwaukee-Eight 114, Milwaukee-Eight 117, Milwaukee-Eight 117 High Output and CVO Milwaukee-Eight 117. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.

Does the Andrews M460 need a tune?

Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.

Is the Andrews M460 a good cam for me?

This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.

Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.

Install the Andrews M460

Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.

Build it in the calculatorRequest a quote
(902) 755-6532
Book Service