Mon–Fri 9am–5pm · (902) 755-6532

Feuling · Top-end power

Feuling 574 Cam: Horsepower & Torque Gains

Hot-rod cam with strong mid and top-end power.

This is a top-end grind. It gives up some bottom-end grunt to make more power at higher rpm, and it rewards riders who like to rev the engine out.

Engine
Twin Cam 103
Est. output
96 hp
106 ft-lb
Gain
+11 hp
+7 ft-lb
Rank
#8 hp
#18 torque of 24

Estimated Gains by Engine

Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Feuling 574, which makes it a Stage 2 build. Twin Cam numbers are calibrated against Fuel Moto's back-to-back Twin Cam 103 cam shootout.

EngineStockStage 1Stage 2 with 574Try it
Twin Cam 11088 hp / 100 ft-lb99 hp / 110 ft-lb111 hp / 118 ft-lbOpen in calculator →
Twin Cam 10376 hp / 90 ft-lb85 hp / 99 ft-lb96 hp / 106 ft-lbOpen in calculator →
Twin Cam 9669 hp / 82 ft-lb78 hp / 90 ft-lb87 hp / 96 ft-lbOpen in calculator →
Twin Cam 8863 hp / 73 ft-lb71 hp / 81 ft-lb80 hp / 86 ft-lbOpen in calculator →

Supporting Mods for the Feuling 574

  • Required: Hydraulic cam chain tensioners. The stock shoe-style tensioners wear out, and a cam install is the time to replace them.
  • Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.

Feuling 574 vs Similar Cams

Other top-end power grinds on the Twin Cam 103, same supporting parts.

Full Harley cam comparison chart →

Feuling 574 FAQ

How much horsepower does the Feuling 574 add in a Stage 2 build?

On a Stage 1 Twin Cam 103 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Feuling 574 adds about 11 hp and 7 ft-lb at the rear wheel, for a Stage 2 build of roughly 96 hp / 106 ft-lb.

What engines does the Feuling 574 fit?

The Feuling 574 is listed for the Twin Cam 110, Twin Cam 103, Twin Cam 96 and Twin Cam 88. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.

Does the Feuling 574 need a tune?

Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.

Is the Feuling 574 a good cam for me?

This is a top-end grind. It gives up some bottom-end grunt to make more power at higher rpm, and it rewards riders who like to rev the engine out.

Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.

Install the Feuling 574

Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.

Build it in the calculatorRequest a quote
(902) 755-6532
Book Service