Feuling · Low-end torque
Feuling 525 Cam: Horsepower & Torque Gains
Linear curve with strong low and mid-range power.
This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.
Estimated Gains by Engine
Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Feuling 525, which makes it a Stage 2 build. Twin Cam numbers are calibrated against Fuel Moto's back-to-back Twin Cam 103 cam shootout.
| Engine | Stock | Stage 1 | Stage 2 with 525 | Try it |
|---|---|---|---|---|
| Twin Cam 110 | 88 hp / 100 ft-lb | 99 hp / 110 ft-lb | 110 hp / 117 ft-lb | Open in calculator → |
| Twin Cam 103 | 76 hp / 90 ft-lb | 85 hp / 99 ft-lb | 95 hp / 105 ft-lb | Open in calculator → |
| Twin Cam 96 | 69 hp / 82 ft-lb | 78 hp / 90 ft-lb | 86 hp / 96 ft-lb | Open in calculator → |
| Twin Cam 88 | 63 hp / 73 ft-lb | 71 hp / 81 ft-lb | 79 hp / 85 ft-lb | Open in calculator → |
Supporting Mods for the Feuling 525
- Required: Hydraulic cam chain tensioners. The stock shoe-style tensioners wear out, and a cam install is the time to replace them.
- Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
Feuling 525 vs Similar Cams
Other low-end torque grinds on the Twin Cam 103, same supporting parts.
Feuling 525 FAQ
How much horsepower does the Feuling 525 add in a Stage 2 build?
On a Stage 1 Twin Cam 103 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Feuling 525 adds about 10 hp and 6 ft-lb at the rear wheel, for a Stage 2 build of roughly 95 hp / 105 ft-lb.
What engines does the Feuling 525 fit?
The Feuling 525 is listed for the Twin Cam 110, Twin Cam 103, Twin Cam 96 and Twin Cam 88. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.
Does the Feuling 525 need a tune?
Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.
Is the Feuling 525 a good cam for me?
This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.
Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.
Install the Feuling 525
Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.
Build it in the calculatorRequest a quote