Mon–Fri 9am–5pm · (902) 755-6532

Screamin' Eagle · Mid-range

Screamin' Eagle SE8-511 Cam: Horsepower & Torque Gains

Factory-backed performance grind with a strong mid-range.

This grind is built for the middle of the rev range, where most riders spend their time. Expect a stronger pull for passing and highway roll-ons than a pure torque cam.

Engine
M8 114
Est. output
108 hp
131 ft-lb
Gain
+12 hp
+9 ft-lb
Rank
#6 hp
#9 torque of 15

Estimated Gains by Engine

Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Screamin' Eagle SE8-511, which makes it a Stage 2 build.

EngineStockStage 1Stage 2 with SE8-511Try it
Milwaukee-Eight 10778 hp / 101 ft-lb88 hp / 111 ft-lb99 hp / 119 ft-lbOpen in calculator →
Milwaukee-Eight 11485 hp / 111 ft-lb96 hp / 122 ft-lb108 hp / 131 ft-lbOpen in calculator →
Milwaukee-Eight 11793 hp / 116 ft-lb105 hp / 128 ft-lb118 hp / 137 ft-lbOpen in calculator →
Milwaukee-Eight 117 High Output103 hp / 118 ft-lb112 hp / 126 ft-lb126 hp / 135 ft-lbOpen in calculator →
CVO Milwaukee-Eight 11793 hp / 116 ft-lb105 hp / 128 ft-lb118 hp / 137 ft-lbOpen in calculator →

Supporting Mods for the Screamin' Eagle SE8-511

  • Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
  • Recommended: A heavy-duty clutch spring. At around 131 ft-lb the stock clutch may start to slip.

Screamin' Eagle SE8-511 FAQ

How much horsepower does the Screamin' Eagle SE8-511 add in a Stage 2 build?

On a Stage 1 Milwaukee-Eight 114 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Screamin' Eagle SE8-511 adds about 12 hp and 9 ft-lb at the rear wheel, for a Stage 2 build of roughly 108 hp / 131 ft-lb.

What engines does the Screamin' Eagle SE8-511 fit?

The Screamin' Eagle SE8-511 is listed for the Milwaukee-Eight 107, Milwaukee-Eight 114, Milwaukee-Eight 117, Milwaukee-Eight 117 High Output and CVO Milwaukee-Eight 117. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.

Does the Screamin' Eagle SE8-511 need a tune?

Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.

Is the Screamin' Eagle SE8-511 a good cam for me?

This grind is built for the middle of the rev range, where most riders spend their time. Expect a stronger pull for passing and highway roll-ons than a pure torque cam.

Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.

Install the Screamin' Eagle SE8-511

Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.

Build it in the calculatorRequest a quote
(902) 755-6532
Book Service