S&S Cycle · All-round
S&S Cycle MR103 Cam: Horsepower & Torque Gains
Balanced, linear power from idle to redline. Top torque in Fuel Moto's 103 test.
This grind spreads its gains across the rev range, with linear power from idle to redline.
Estimated Gains by Engine
Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the S&S Cycle MR103, which makes it a Stage 2 build. Twin Cam numbers are calibrated against Fuel Moto's back-to-back Twin Cam 103 cam shootout.
| Engine | Stock | Stage 1 | Stage 2 with MR103 | Try it |
|---|---|---|---|---|
| Twin Cam 110 | 88 hp / 100 ft-lb | 99 hp / 110 ft-lb | 111 hp / 122 ft-lb | Open in calculator → |
| Twin Cam 103 | 76 hp / 90 ft-lb | 85 hp / 99 ft-lb | 96 hp / 110 ft-lb | Open in calculator → |
| Twin Cam 96 | 69 hp / 82 ft-lb | 78 hp / 90 ft-lb | 87 hp / 100 ft-lb | Open in calculator → |
| Twin Cam 88 | 63 hp / 73 ft-lb | 71 hp / 81 ft-lb | 79 hp / 89 ft-lb | Open in calculator → |
Supporting Mods for the S&S Cycle MR103
- Required: Hydraulic cam chain tensioners. The stock shoe-style tensioners wear out, and a cam install is the time to replace them.
- Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
S&S Cycle MR103 FAQ
How much horsepower does the S&S Cycle MR103 add in a Stage 2 build?
On a Stage 1 Twin Cam 103 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the S&S Cycle MR103 adds about 11 hp and 11 ft-lb at the rear wheel, for a Stage 2 build of roughly 96 hp / 110 ft-lb.
What engines does the S&S Cycle MR103 fit?
The S&S Cycle MR103 is listed for the Twin Cam 110, Twin Cam 103, Twin Cam 96 and Twin Cam 88. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.
Does the S&S Cycle MR103 need a tune?
Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.
Is the S&S Cycle MR103 a good cam for me?
This grind spreads its gains across the rev range, with linear power from idle to redline.
Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.
Install the S&S Cycle MR103
Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.
Build it in the calculatorRequest a quote