Evolution Big Twin · 1984–1999
Evolution 80 (Big Twin) Horsepower Calculator
A stock Evolution 80 (Big Twin) makes about 57 hp and 68 ft-lb at the rear wheel. Found in the Softail, Dyna, FXR and Touring. Add the parts on your bike and the ones you're considering to estimate what your build will make.
1Choose your engine
Softail, Dyna, FXR and Touring.
2Your parts
Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.
Fills in a typical parts list for that stage. You can change any part afterwards.
Air intake
A high-flow air cleaner lets the engine breathe.
Exhaust
2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.
Carburetor & jetting
Carbureted engines need re-jetting or a performance carb to match breathing mods.
Ignition
Programmable ignition lets us set timing to suit your build.
Camshaft
The single biggest bolt-in change to how your engine pulls.
Cylinder heads
Better airflow through the heads. Pays off most with a cam or big bore.
Supporting parts
No horsepower on their own, but they keep a modified engine reliable.
Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.
Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.
Estimated power curve
An illustration of where your Evolution 80 (Big Twin) makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.
Horsepower
hp at the rear wheelTorque
ft-lb at the rear wheelAdd parts or pick a stage above to compare your build with stock.
Evolution 80 (Big Twin) Stage 1 & 2 Horsepower
Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.
Best Cams for the Evolution 80 (Big Twin)
Estimated rear-wheel output for every cam in our database on a Evolution 80 (Big Twin) with a high-flow air cleaner, a 2-into-1 exhaust and a performance carburetor (≈ 65 hp / 74 ft-lb before the cam).
| Cam | Character | Est. hp | Est. ft-lb | Gain |
|---|---|---|---|---|
| S&S Cycle 640 | Top-end power | 75 | 76 | +10 hp / +2 ft-lb |
| Andrews EV46 | Mid-range | 73 | 79 | +8 hp / +5 ft-lb |
| Andrews EV51 | Top-end power | 73 | 77 | +8 hp / +3 ft-lb |
| S&S Cycle 561 | Top-end power | 73 | 77 | +8 hp / +3 ft-lb |
| Feuling Reaper 543 | Mid-range | 73 | 79 | +8 hp / +5 ft-lb |
| S&S Cycle 508 | Mid-range | 72 | 79 | +7 hp / +5 ft-lb |
| Feuling Reaper 518 | Low-end torque | 72 | 80 | +7 hp / +6 ft-lb |
| Andrews EV27 | Low-end torque | 71 | 81 | +6 hp / +7 ft-lb |
| Andrews EV13 | Low-end torque | 69 | 80 | +4 hp / +6 ft-lb |
Want a side-by-side across all engines? See the Harley cam comparison chart.
Exhaust Options for the Evolution 80 (Big Twin)
Estimated gain from each exhaust on a Evolution 80 (Big Twin) that already has a high-flow intake and carb work. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.
| Exhaust | Type | Est. gain |
|---|---|---|
| Vance & Hines Pro Pipe 2-into-1 | 2-into-1 · Power | +3 hp / +3 ft-lb |
| Vance & Hines Hi-Output 2-into-1 | 2-into-1 · Power | +3 hp / +3 ft-lb |
| Bassani Road Rage 2-into-1 | 2-into-1 · Power | +3 hp / +3 ft-lb |
| Thunderheader 2-into-1 | 2-into-1 · Classic | +3 hp / +3 ft-lb |
| Vance & Hines Big Shots Long (2-into-2) | Drag pipes · Sound | 0 hp / 0 ft-lb |
Evolution 80 (Big Twin) FAQ
How much horsepower does a stock Evolution 80 (Big Twin) make?
A healthy stock Evolution 80 (Big Twin) makes roughly 57 hp and 68 ft-lb of torque at the rear wheel. Factory figures are measured at the crankshaft, so they're higher than what a dyno shows at the wheel.
How much horsepower does a Stage 1 Evolution 80 (Big Twin) make?
A Stage 1 Evolution 80 (Big Twin) (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 65 hp and 74 ft-lb at the rear wheel, about 8 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1 and S&S Cycle Super E.
How much horsepower does a Stage 2 Evolution 80 (Big Twin) make?
A Stage 2 Evolution 80 (Big Twin) (Stage 1 plus a performance cam) makes roughly 71 hp and 81 ft-lb at the rear wheel, about 14 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, S&S Cycle Super E, Andrews EV27 and S&S Cycle Quickee Adjustable Pushrods.
How much horsepower does a cam add to a Evolution 80 (Big Twin)?
On top of a high-flow air cleaner, a 2-into-1 exhaust and a performance carburetor, a cam takes a Evolution 80 (Big Twin) to roughly 69–75 hp depending on the grind. In our estimates the S&S Cycle 640 makes the most peak power (≈ 75 hp) and the Andrews EV27 makes the most torque (≈ 81 ft-lb).
Does a Evolution 80 (Big Twin) need a tune after an exhaust or air cleaner?
Yes. A carbureted engine needs re-jetting, or a performance carb like an S&S Super E, to match a freer intake and exhaust. Otherwise it runs lean.
Other Engines
Build it with Arch Customs
Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.
Start from intake, exhaust & tune →