Mon–Fri 9am–5pm · (902) 755-6532

S&S Cycle · Top-end power

S&S Cycle 585 Cam: Horsepower & Torque Gains

Hot-rod grind that's strongest from 3,000 rpm up.

This is a top-end grind. It gives up some bottom-end grunt to make more power at higher rpm, and it rewards riders who like to rev the engine out.

Engine
Twin Cam 103
Est. output
96 hp
106 ft-lb
Gain
+11 hp
+7 ft-lb
Rank
#7 hp
#17 torque of 24

Estimated Gains by Engine

Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the S&S Cycle 585, which makes it a Stage 2 build. Twin Cam numbers are calibrated against Fuel Moto's back-to-back Twin Cam 103 cam shootout.

EngineStockStage 1Stage 2 with 585Try it
Twin Cam 11088 hp / 100 ft-lb99 hp / 110 ft-lb111 hp / 118 ft-lbOpen in calculator →
Twin Cam 10376 hp / 90 ft-lb85 hp / 99 ft-lb96 hp / 106 ft-lbOpen in calculator →
Twin Cam 9669 hp / 82 ft-lb78 hp / 90 ft-lb85 hp / 96 ft-lbOpen in calculator →
Twin Cam 8863 hp / 73 ft-lb71 hp / 81 ft-lb78 hp / 85 ft-lbOpen in calculator →

Supporting Mods for the S&S Cycle 585

  • Consider: This grind makes its best power with more displacement or compression, so it's usually paired with a big bore kit.
  • Required: Hydraulic cam chain tensioners. The stock shoe-style tensioners wear out, and a cam install is the time to replace them.
  • Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
  • Consider: Performance lifters to go with a higher-lift cam.
  • Consider: A high-performance oil pump for better oiling in a built Twin Cam.

S&S Cycle 585 vs Similar Cams

Other top-end power grinds on the Twin Cam 103, same supporting parts.

Full Harley cam comparison chart →

S&S Cycle 585 FAQ

How much horsepower does the S&S Cycle 585 add in a Stage 2 build?

On a Stage 1 Twin Cam 103 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the S&S Cycle 585 adds about 11 hp and 7 ft-lb at the rear wheel, for a Stage 2 build of roughly 96 hp / 106 ft-lb.

What engines does the S&S Cycle 585 fit?

The S&S Cycle 585 is listed for the Twin Cam 110, Twin Cam 103, Twin Cam 96 and Twin Cam 88. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.

Does the S&S Cycle 585 need a tune?

Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.

Is the S&S Cycle 585 a good cam for me?

This is a top-end grind. It gives up some bottom-end grunt to make more power at higher rpm, and it rewards riders who like to rev the engine out. It works best with more displacement or compression, so it's usually paired with a big bore kit or a higher-compression build.

Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.

Install the S&S Cycle 585

Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.

Build it in the calculatorRequest a quote
(902) 755-6532
Book Service