Mon–Fri 9am–5pm · (902) 755-6532

Twin Cam · 2010–2017

Twin Cam 103 Horsepower Calculator

A stock Twin Cam 103 makes about 76 hp and 90 ft-lb at the rear wheel. Found in the Touring, Softail and Dyna (Street Glide, Road King, Fat Bob, Street Bob and more). Add the parts on your bike and the ones you're considering to estimate what your build will make.

Stock
76 hp
90 ft-lb
Stage 1
85 hp
99 ft-lb
Stage 2
96 hp
109 ft-lb
Stage 3
102 hp
117 ft-lb
76 hp / 90 ft-lbDetails ↓

1Choose your engine

Touring, Softail and Dyna (Street Glide, Road King, Fat Bob, Street Bob and more).

2Your parts

Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.

Quick start with a stage

Fills in a typical parts list for that stage. You can change any part afterwards.

Air intake

A high-flow air cleaner lets the engine breathe.

Exhaust

2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.

EFI tuner

Required on fuel-injected bikes once you change intake, exhaust or internals.

Camshaft

The single biggest bolt-in change to how your engine pulls.

Big bore / stroker kit

More displacement means more power and torque everywhere.

Cylinder heads

Better airflow through the heads. Pays off most with a cam or big bore.

Throttle body

More airflow for big-inch and ported-head builds.

Supporting parts

No horsepower on their own, but they keep a modified engine reliable.

Feuling Hydraulic Cam Tensioner ConversionReplaces the wear-prone stock shoe tensioners.
S&S Cycle Cam Support Plate (hydraulic tensioners)Upgraded cam plate with hydraulic tensioners.
S&S Cycle Quickee Adjustable PushrodsLets us install cams without pulling the rocker boxes.
Feuling Race Series Adjustable PushrodsStiff, adjustable pushrods for performance cams.
Feuling HP+ LiftersHigh-performance lifters for higher-lift cams.
Feuling HP+ Oil PumpImproved oil pressure and scavenging for built engines.
Barnett Heavy-Duty Clutch SpringHolds the extra torque so the clutch doesn't slip.

Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.

Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.

Estimated power curve

An illustration of where your Twin Cam 103 makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.

Stock

Horsepower

hp at the rear wheel
203040506070802,0002,5003,0003,5004,0004,5005,0005,500Stock 76

Torque

ft-lb at the rear wheel
657075808590952,0002,5003,0003,5004,0004,5005,0005,500Stock 72

Add parts or pick a stage above to compare your build with stock.

Twin Cam 103 Stage 1, 2, 3 & 4 Horsepower

Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.

StageTypical partsEst. hpEst. ft-lb
Stock—7690
Stage 1S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune)8599Open →
Stage 2S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Feuling Hydraulic Cam Tensioner Conversion, S&S Cycle Quickee Adjustable Pushrods96109Open →
Stage 3S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Screamin' Eagle 110 Big Bore Kit, Feuling Hydraulic Cam Tensioner Conversion, S&S Cycle Quickee Adjustable Pushrods, Barnett Heavy-Duty Clutch Spring102117Open →
Stage 4S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Screamin' Eagle 110 Big Bore Kit, Screamin' Eagle CNC-Ported Heads, Feuling Hydraulic Cam Tensioner Conversion, S&S Cycle Quickee Adjustable Pushrods, Barnett Heavy-Duty Clutch Spring108121Open →

Best Cams for the Twin Cam 103

Estimated rear-wheel output for every cam in our database on a Twin Cam 103 with a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune (≈ 85 hp / 99 ft-lb before the cam). Twin Cam estimates are calibrated against Fuel Moto's back-to-back Twin Cam 103 camshaft shootout.

CamCharacterEst. hpEst. ft-lbGain
Wood Performance TW-999-6aTop-end power98110+13 hp / +11 ft-lb
Wood Performance TW-777Mid-range97110+12 hp / +11 ft-lb
S&S Cycle 570Mid-range97108+12 hp / +9 ft-lb
Wood Performance TW-222Low-end torque96109+11 hp / +10 ft-lb
Wood Performance TW-555Mid-range96110+11 hp / +11 ft-lb
S&S Cycle MR103All-round96110+11 hp / +11 ft-lb
S&S Cycle 585Top-end power96106+11 hp / +7 ft-lb
Feuling 574Top-end power96106+11 hp / +7 ft-lb
Screamin' Eagle SE-259EMid-range96106+11 hp / +7 ft-lb
Feuling 525Low-end torque95105+10 hp / +6 ft-lb
Feuling 543Mid-range95107+10 hp / +8 ft-lb
Andrews 57HMid-range95107+10 hp / +8 ft-lb
Andrews TW37Mid-range95106+10 hp / +7 ft-lb
Andrews 48HLow-end torque94109+9 hp / +10 ft-lb
Zipper's Red Shift 527Low-end torque94108+9 hp / +9 ft-lb
Zipper's Red Shift 575Mid-range94108+9 hp / +9 ft-lb
Cycle-Rama 570-2Low-end torque94109+9 hp / +10 ft-lb
Cycle-Rama 575Mid-range94107+9 hp / +8 ft-lb
S&S Cycle 583Low-end torque92108+7 hp / +9 ft-lb
S&S Cycle 551Low-end torque91109+6 hp / +10 ft-lb
Andrews TW26Low-end torque91106+6 hp / +7 ft-lb
Screamin' Eagle SE-204Low-end torque91106+6 hp / +7 ft-lb
Screamin' Eagle SE-255Low-end torque91106+6 hp / +7 ft-lb
Zipper's Red Shift 525Low-end torque89108+4 hp / +9 ft-lb

Want a side-by-side across all engines? See the Harley cam comparison chart.

Exhaust Options for the Twin Cam 103

Estimated gain from each exhaust on a Twin Cam 103 that already has a high-flow intake and a custom tune. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.

ExhaustTypeEst. gain
Vance & Hines Pro Pipe 2-into-12-into-1 · Power+4 hp / +4 ft-lb
Vance & Hines Hi-Output 2-into-12-into-1 · Power+4 hp / +4 ft-lb
Bassani Road Rage 2-into-12-into-1 · Power+4 hp / +4 ft-lb
D&D Fat Cat 2-into-12-into-1 · Power+4 hp / +5 ft-lb
Two Brothers Racing Comp-S 2-into-12-into-1 · Power+4 hp / +4 ft-lb
S&S Cycle SuperStreet 2-into-12-into-1 · Power+4 hp / +4 ft-lb
Thunderheader 2-into-12-into-1 · Classic+4 hp / +4 ft-lb
Rinehart Racing True Duals (2-into-2)True duals · Sound+3 hp / +2 ft-lb
Vance & Hines Eliminator 300 Slip-OnsSlip-on · Sound+2 hp / +2 ft-lb
Rinehart Racing 4" Slip-On MufflersSlip-on · Sound+2 hp / +2 ft-lb
Screamin' Eagle Street Cannon Slip-OnsSlip-on · Sound+2 hp / +2 ft-lb
Vance & Hines Big Shots Long (2-into-2)Drag pipes · Sound+1 hp / 0 ft-lb

Twin Cam 103 Big Bore Kits

Estimated output with the kit, a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, and a matched torque cam.

KitDisplacementEst. hpEst. ft-lb
Screamin' Eagle 110 Big Bore Kit + Wood Performance TW-222103 → 110 ci102117

Twin Cam 103 FAQ

How much horsepower does a stock Twin Cam 103 make?

A healthy stock Twin Cam 103 makes roughly 76 hp and 90 ft-lb of torque at the rear wheel. Factory figures are measured at the crankshaft, so they're higher than what a dyno shows at the wheel.

How much horsepower does a Stage 1 Twin Cam 103 make?

A Stage 1 Twin Cam 103 (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 85 hp and 99 ft-lb at the rear wheel, about 9 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1 and Dynojet Power Vision 3 (custom dyno tune).

How much horsepower does a Stage 2 Twin Cam 103 make?

A Stage 2 Twin Cam 103 (Stage 1 plus a performance cam) makes roughly 96 hp and 109 ft-lb at the rear wheel, about 20 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Feuling Hydraulic Cam Tensioner Conversion and S&S Cycle Quickee Adjustable Pushrods.

How much horsepower does a Stage 3 Twin Cam 103 make?

A Stage 3 Twin Cam 103 (Stage 2 plus a big bore kit) makes roughly 102 hp and 117 ft-lb at the rear wheel, about 26 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Screamin' Eagle 110 Big Bore Kit, Feuling Hydraulic Cam Tensioner Conversion, S&S Cycle Quickee Adjustable Pushrods and Barnett Heavy-Duty Clutch Spring.

How much horsepower does a cam add to a Twin Cam 103?

On top of a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, a cam takes a Twin Cam 103 to roughly 89–98 hp depending on the grind. In our estimates the Wood Performance TW-999-6a makes the most peak power (≈ 98 hp) and the Wood Performance TW-999-6a makes the most torque (≈ 110 ft-lb).

Does a Twin Cam 103 need a tune after an exhaust or air cleaner?

Yes. A freer intake or exhaust makes a fuel-injected engine run lean on the stock tune, which costs power and adds heat. A tuner like the Dynojet Power Vision with a custom dyno tune gets the full gain.

Other Engines

Build it with Arch Customs

Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.

Start from intake, exhaust & tune →
(902) 755-6532
Book Service