Mon–Fri 9am–5pm · (902) 755-6532

Cycle-Rama · Low-end torque

Cycle-Rama 570-2 Cam: Horsepower & Torque Gains

Maximum torque with early power delivery.

This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.

Engine
Twin Cam 103
Est. output
94 hp
109 ft-lb
Gain
+9 hp
+10 ft-lb
Rank
#17 hp
#7 torque of 24

Estimated Gains by Engine

Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Cycle-Rama 570-2, which makes it a Stage 2 build. Twin Cam numbers are calibrated against Fuel Moto's back-to-back Twin Cam 103 cam shootout.

EngineStockStage 1Stage 2 with 570-2Try it
Twin Cam 11088 hp / 100 ft-lb99 hp / 110 ft-lb109 hp / 121 ft-lbOpen in calculator →
Twin Cam 10376 hp / 90 ft-lb85 hp / 99 ft-lb94 hp / 109 ft-lbOpen in calculator →
Twin Cam 9669 hp / 82 ft-lb78 hp / 90 ft-lb86 hp / 99 ft-lbOpen in calculator →
Twin Cam 8863 hp / 73 ft-lb71 hp / 81 ft-lb78 hp / 88 ft-lbOpen in calculator →

Supporting Mods for the Cycle-Rama 570-2

  • Required: Hydraulic cam chain tensioners. The stock shoe-style tensioners wear out, and a cam install is the time to replace them.
  • Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.

Cycle-Rama 570-2 FAQ

How much horsepower does the Cycle-Rama 570-2 add in a Stage 2 build?

On a Stage 1 Twin Cam 103 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Cycle-Rama 570-2 adds about 9 hp and 10 ft-lb at the rear wheel, for a Stage 2 build of roughly 94 hp / 109 ft-lb.

What engines does the Cycle-Rama 570-2 fit?

The Cycle-Rama 570-2 is listed for the Twin Cam 110, Twin Cam 103, Twin Cam 96 and Twin Cam 88. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.

Does the Cycle-Rama 570-2 need a tune?

Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.

Is the Cycle-Rama 570-2 a good cam for me?

This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.

Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.

Install the Cycle-Rama 570-2

Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.

Build it in the calculatorRequest a quote
(902) 755-6532
Book Service