Mon–Fri 9am–5pm · (902) 755-6532

Andrews · Low-end torque

Andrews TW26 Cam: Horsepower & Torque Gains

Mild, smooth grind for heavy touring bikes.

This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.

Engine
Twin Cam 103
Est. output
91 hp
106 ft-lb
Gain
+6 hp
+7 ft-lb
Rank
#21 hp
#21 torque of 24

Estimated Gains by Engine

Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Andrews TW26, which makes it a Stage 2 build. Twin Cam numbers are calibrated against Fuel Moto's back-to-back Twin Cam 103 cam shootout.

EngineStockStage 1Stage 2 with TW26Try it
Twin Cam 11088 hp / 100 ft-lb99 hp / 110 ft-lb105 hp / 118 ft-lbOpen in calculator →
Twin Cam 10376 hp / 90 ft-lb85 hp / 99 ft-lb91 hp / 106 ft-lbOpen in calculator →
Twin Cam 9669 hp / 82 ft-lb78 hp / 90 ft-lb82 hp / 97 ft-lbOpen in calculator →
Twin Cam 8863 hp / 73 ft-lb71 hp / 81 ft-lb75 hp / 86 ft-lbOpen in calculator →

Supporting Mods for the Andrews TW26

  • Required: Hydraulic cam chain tensioners. The stock shoe-style tensioners wear out, and a cam install is the time to replace them.
  • Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.

Andrews TW26 FAQ

How much horsepower does the Andrews TW26 add in a Stage 2 build?

On a Stage 1 Twin Cam 103 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Andrews TW26 adds about 6 hp and 7 ft-lb at the rear wheel, for a Stage 2 build of roughly 91 hp / 106 ft-lb.

What engines does the Andrews TW26 fit?

The Andrews TW26 is listed for the Twin Cam 110, Twin Cam 103, Twin Cam 96 and Twin Cam 88. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.

Does the Andrews TW26 need a tune?

Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.

Is the Andrews TW26 a good cam for me?

This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.

Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.

Install the Andrews TW26

Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.

Build it in the calculatorRequest a quote
(902) 755-6532
Book Service