Andrews · Top-end power
Andrews N8 Cam: Horsepower & Torque Gains
Hotter set for 1200-based builds that like to rev.
This is a top-end grind. It gives up some bottom-end grunt to make more power at higher rpm, and it rewards riders who like to rev the engine out.
Estimated Gains by Engine
Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Andrews N8, which makes it a Stage 2 build.
| Engine | Stock | Stage 1 | Stage 2 with N8 | Try it |
|---|---|---|---|---|
| Sportster 1200 (Evolution) | 59 hp / 67 ft-lb | 66 hp / 74 ft-lb | 77 hp / 78 ft-lb | Open in calculator → |
| Sportster 883 (Evolution) | 47 hp / 49 ft-lb | 53 hp / 54 ft-lb | 61 hp / 57 ft-lb | Open in calculator → |
Supporting Mods for the Andrews N8
- Consider: This grind makes its best power with more displacement or compression, so it's usually paired with a big bore kit.
Andrews N8 FAQ
How much horsepower does the Andrews N8 add in a Stage 2 build?
On a Stage 1 Sportster 1200 (Evolution) (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Andrews N8 adds about 11 hp and 4 ft-lb at the rear wheel, for a Stage 2 build of roughly 77 hp / 78 ft-lb.
What engines does the Andrews N8 fit?
The Andrews N8 is listed for the Sportster 1200 (Evolution) and Sportster 883 (Evolution). Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.
Does the Andrews N8 need a tune?
Yes. On a carbureted engine, plan on re-jetting or a performance carb, and a programmable ignition helps match timing to the new cam.
Is the Andrews N8 a good cam for me?
This is a top-end grind. It gives up some bottom-end grunt to make more power at higher rpm, and it rewards riders who like to rev the engine out. It works best with more displacement or compression, so it's usually paired with a big bore kit or a higher-compression build.
Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.
Install the Andrews N8
Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.
Build it in the calculatorRequest a quote