Mon–Fri 9am–5pm · (902) 755-6532

Andrews · Low-end torque

Andrews EV13 Cam: Horsepower & Torque Gains

Bolt-in touring cam for heavy bikes and two-up riding. Uses stock springs.

This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.

Engine
Evolution 80 (Big Twin)
Est. output
69 hp
80 ft-lb
Gain
+4 hp
+6 ft-lb
Rank
#9 hp
#3 torque of 9

Estimated Gains by Engine

Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Andrews EV13, which makes it a Stage 2 build.

EngineStockStage 1Stage 2 with EV13Try it
Evolution 80 (Big Twin)57 hp / 68 ft-lb65 hp / 74 ft-lb69 hp / 80 ft-lbOpen in calculator →

Supporting Mods for the Andrews EV13

  • Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
  • Consider: A programmable ignition so timing can be matched to the new cam.

Andrews EV13 vs Similar Cams

Other low-end torque grinds on the Evolution 80 (Big Twin), same supporting parts.

Full Harley cam comparison chart →

Andrews EV13 FAQ

How much horsepower does the Andrews EV13 add in a Stage 2 build?

On a Stage 1 Evolution 80 (Big Twin) (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Andrews EV13 adds about 4 hp and 6 ft-lb at the rear wheel, for a Stage 2 build of roughly 69 hp / 80 ft-lb.

What engines does the Andrews EV13 fit?

The Andrews EV13 is listed for the Evolution 80 (Big Twin). Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.

Does the Andrews EV13 need a tune?

Yes. On a carbureted engine, plan on re-jetting or a performance carb, and a programmable ignition helps match timing to the new cam.

Is the Andrews EV13 a good cam for me?

This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.

Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.

Install the Andrews EV13

Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.

Build it in the calculatorRequest a quote
(902) 755-6532
Book Service