Mon–Fri 9am–5pm · (902) 755-6532

Sportster (Evolution) · 1988–2021

Sportster 1200 (Evolution) Horsepower Calculator

A stock Sportster 1200 (Evolution) makes about 59 hp and 67 ft-lb at the rear wheel. Found in the Sportster 1200 Custom, Roadster, Iron 1200, Forty-Eight, Seventy-Two. Add the parts on your bike and the ones you're considering to estimate what your build will make.

Stock
59 hp
67 ft-lb
Stage 1
66 hp
74 ft-lb
Stage 2
74 hp
80 ft-lb
Stage 3
76 hp
82 ft-lb
59 hp / 67 ft-lbDetails ↓

1Choose your engine

Sportster 1200 Custom, Roadster, Iron 1200, Forty-Eight, Seventy-Two.

2Your parts

Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.

Quick start with a stage

Fills in a typical parts list for that stage. You can change any part afterwards.

Air intake

A high-flow air cleaner lets the engine breathe.

Exhaust

2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.

EFI tuner

Required on fuel-injected bikes once you change intake, exhaust or internals.

Camshaft

The single biggest bolt-in change to how your engine pulls.

Big bore / stroker kit

More displacement means more power and torque everywhere.

Cylinder heads

Better airflow through the heads. Pays off most with a cam or big bore.

Supporting parts

No horsepower on their own, but they keep a modified engine reliable.

Barnett Heavy-Duty Clutch SpringHolds the extra torque so the clutch doesn't slip.

Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.

Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.

Estimated power curve

An illustration of where your Sportster 1200 (Evolution) makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.

Stock

Horsepower

hp at the rear wheel
2030405060702,0002,5003,0003,5004,0004,5005,0005,5006,000Stock 58

Torque

ft-lb at the rear wheel
4550556065702,0002,5003,0003,5004,0004,5005,0005,5006,000Stock 50

Add parts or pick a stage above to compare your build with stock.

Sportster 1200 (Evolution) Stage 1, 2, 3 & 4 Horsepower

Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.

StageTypical partsEst. hpEst. ft-lb
Stock—5967
Stage 1S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune)6674Open →
Stage 2S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Andrews N47480Open →
Stage 3S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Andrews N4, Screamin' Eagle 1250 Kit, Barnett Heavy-Duty Clutch Spring7682Open →
Stage 4S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Andrews N4, Screamin' Eagle 1250 Kit, Head porting Port your stock heads, Barnett Heavy-Duty Clutch Spring8085Open →

Best Cams for the Sportster 1200 (Evolution)

Estimated rear-wheel output for every cam in our database on a Sportster 1200 (Evolution) with a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune (≈ 66 hp / 74 ft-lb before the cam).

CamCharacterEst. hpEst. ft-lbGain
Andrews N8Top-end power7778+11 hp / +4 ft-lb
Andrews N4Mid-range7480+8 hp / +6 ft-lb
Andrews N2Low-end torque7279+6 hp / +5 ft-lb

Want a side-by-side across all engines? See the Harley cam comparison chart.

Exhaust Options for the Sportster 1200 (Evolution)

Estimated gain from each exhaust on a Sportster 1200 (Evolution) that already has a high-flow intake and a custom tune. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.

ExhaustTypeEst. gain
Vance & Hines Hi-Output 2-into-12-into-1 · Power+3 hp / +3 ft-lb
Bassani Road Rage 2-into-12-into-1 · Power+3 hp / +3 ft-lb
Vance & Hines Big Shots Long (2-into-2)Drag pipes · Sound+1 hp / -1 ft-lb

Sportster 1200 (Evolution) Big Bore Kits

Estimated output with the kit, a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, and a matched torque cam.

KitDisplacementEst. hpEst. ft-lb
Screamin' Eagle 1250 Kit + Andrews N21200 → 1250 cc7482

Sportster 1200 (Evolution) FAQ

How much horsepower does a stock Sportster 1200 (Evolution) make?

A healthy stock Sportster 1200 (Evolution) makes roughly 59 hp and 67 ft-lb of torque at the rear wheel. Factory figures are measured at the crankshaft, so they're higher than what a dyno shows at the wheel.

How much horsepower does a Stage 1 Sportster 1200 (Evolution) make?

A Stage 1 Sportster 1200 (Evolution) (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 66 hp and 74 ft-lb at the rear wheel, about 7 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1 and Dynojet Power Vision 3 (custom dyno tune).

How much horsepower does a Stage 2 Sportster 1200 (Evolution) make?

A Stage 2 Sportster 1200 (Evolution) (Stage 1 plus a performance cam) makes roughly 74 hp and 80 ft-lb at the rear wheel, about 15 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune) and Andrews N4.

How much horsepower does a Stage 3 Sportster 1200 (Evolution) make?

A Stage 3 Sportster 1200 (Evolution) (Stage 2 plus a big bore kit) makes roughly 76 hp and 82 ft-lb at the rear wheel, about 17 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Andrews N4, Screamin' Eagle 1250 Kit and Barnett Heavy-Duty Clutch Spring.

How much horsepower does a cam add to a Sportster 1200 (Evolution)?

On top of a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, a cam takes a Sportster 1200 (Evolution) to roughly 72–77 hp depending on the grind. In our estimates the Andrews N8 makes the most peak power (≈ 77 hp) and the Andrews N4 makes the most torque (≈ 80 ft-lb).

Does a Sportster 1200 (Evolution) need a tune after an exhaust or air cleaner?

Yes. A freer intake or exhaust makes a fuel-injected engine run lean on the stock tune, which costs power and adds heat. A tuner like the Dynojet Power Vision with a custom dyno tune gets the full gain.

Other Engines

Build it with Arch Customs

Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.

Start from intake, exhaust & tune →
(902) 755-6532
Book Service