Mon–Fri 9am–5pm · (902) 755-6532

Screamin' Eagle · Low-end torque

Screamin' Eagle SE8-462 Cam: Horsepower & Torque Gains

Bolt-in torque cam with stock-like manners. Hugely popular on Touring bikes.

This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.

Engine
M8 114
Est. output
105 hp
132 ft-lb
Gain
+9 hp
+10 ft-lb
Rank
#13 hp
#6 torque of 15

Estimated Gains by Engine

Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Screamin' Eagle SE8-462, which makes it a Stage 2 build.

EngineStockStage 1Stage 2 with SE8-462Try it
Milwaukee-Eight 10778 hp / 101 ft-lb88 hp / 111 ft-lb97 hp / 120 ft-lbOpen in calculator →
Milwaukee-Eight 11485 hp / 111 ft-lb96 hp / 122 ft-lb105 hp / 132 ft-lbOpen in calculator →
Milwaukee-Eight 11793 hp / 116 ft-lb105 hp / 128 ft-lb115 hp / 138 ft-lbOpen in calculator →
Milwaukee-Eight 117 High Output103 hp / 118 ft-lb112 hp / 126 ft-lb123 hp / 136 ft-lbOpen in calculator →
CVO Milwaukee-Eight 11793 hp / 116 ft-lb105 hp / 128 ft-lb115 hp / 138 ft-lbOpen in calculator →

Supporting Mods for the Screamin' Eagle SE8-462

  • Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
  • Recommended: A heavy-duty clutch spring. At around 132 ft-lb the stock clutch may start to slip.

Screamin' Eagle SE8-462 FAQ

How much horsepower does the Screamin' Eagle SE8-462 add in a Stage 2 build?

On a Stage 1 Milwaukee-Eight 114 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Screamin' Eagle SE8-462 adds about 9 hp and 10 ft-lb at the rear wheel, for a Stage 2 build of roughly 105 hp / 132 ft-lb.

What engines does the Screamin' Eagle SE8-462 fit?

The Screamin' Eagle SE8-462 is listed for the Milwaukee-Eight 107, Milwaukee-Eight 114, Milwaukee-Eight 117, Milwaukee-Eight 117 High Output and CVO Milwaukee-Eight 117. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.

Does the Screamin' Eagle SE8-462 need a tune?

Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.

Is the Screamin' Eagle SE8-462 a good cam for me?

This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.

Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.

Install the Screamin' Eagle SE8-462

Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.

Build it in the calculatorRequest a quote
(902) 755-6532
Book Service