Mon–Fri 9am–5pm · (902) 755-6532

Indian Motorcycle · Mid-range

Indian Motorcycle Stage 2 Performance Cams Cam: Horsepower & Torque Gains

Factory three-cam set. Indian requires its Stage 1 intake and mufflers first, and installation by a certified technician.

This grind is built for the middle of the rev range, where most riders spend their time. Expect a stronger pull for passing and highway roll-ons than a pure torque cam.

Engine
Indian Thunder Stroke 111
Est. output
88 hp
120 ft-lb
Gain
+6 hp
+5 ft-lb
Rank
#2 hp
#3 torque of 3

Estimated Gains by Engine

Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Indian Motorcycle Stage 2 Performance Cams, which makes it a Stage 2 build.

EngineStockStage 1Stage 2 with Stage 2 Performance CamsTry it
Indian Thunder Stroke 11174 hp / 106 ft-lb82 hp / 115 ft-lb88 hp / 120 ft-lbOpen in calculator →
Indian Thunder Stroke 11685 hp / 116 ft-lb94 hp / 126 ft-lb101 hp / 132 ft-lbOpen in calculator →

Supporting Mods for the Indian Motorcycle Stage 2 Performance Cams

  • Recommended: A heavy-duty clutch spring. At around 120 ft-lb the stock clutch may start to slip.

Indian Motorcycle Stage 2 Performance Cams vs Similar Cams

Other mid-range grinds on the Indian Thunder Stroke 111, same supporting parts.

Full Harley cam comparison chart →

Indian Motorcycle Stage 2 Performance Cams FAQ

How much horsepower does the Indian Motorcycle Stage 2 Performance Cams add in a Stage 2 build?

On a Stage 1 Indian Thunder Stroke 111 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Indian Motorcycle Stage 2 Performance Cams adds about 6 hp and 5 ft-lb at the rear wheel, for a Stage 2 build of roughly 88 hp / 120 ft-lb.

What engines does the Indian Motorcycle Stage 2 Performance Cams fit?

The Indian Motorcycle Stage 2 Performance Cams is listed for the Indian Thunder Stroke 111 and Indian Thunder Stroke 116. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.

Does the Indian Motorcycle Stage 2 Performance Cams need a tune?

Yes. On a carbureted engine, plan on re-jetting or a performance carb, and a programmable ignition helps match timing to the new cam.

Is the Indian Motorcycle Stage 2 Performance Cams a good cam for me?

This grind is built for the middle of the rev range, where most riders spend their time. Expect a stronger pull for passing and highway roll-ons than a pure torque cam.

Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.

Install the Indian Motorcycle Stage 2 Performance Cams

Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.

Build it in the calculatorRequest a quote
(902) 755-6532
Book Service