S&S Cycle · Top-end power
S&S Cycle 550C Cam: Horsepower & Torque Gains
Big-power grind recommended for 114 ci Touring and Softail.
This is a top-end grind. It gives up some bottom-end grunt to make more power at higher rpm, and it rewards riders who like to rev the engine out.
Estimated Gains by Engine
Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the S&S Cycle 550C, which makes it a Stage 2 build.
| Engine | Stock | Stage 1 | Stage 2 with 550C | Try it |
|---|---|---|---|---|
| Milwaukee-Eight 107 | 78 hp / 101 ft-lb | 88 hp / 111 ft-lb | 101 hp / 118 ft-lb | Open in calculator → |
| Milwaukee-Eight 114 | 85 hp / 111 ft-lb | 96 hp / 122 ft-lb | 110 hp / 130 ft-lb | Open in calculator → |
| Milwaukee-Eight 117 | 93 hp / 116 ft-lb | 105 hp / 128 ft-lb | 120 hp / 136 ft-lb | Open in calculator → |
| Milwaukee-Eight 117 High Output | 103 hp / 118 ft-lb | 112 hp / 126 ft-lb | 129 hp / 133 ft-lb | Open in calculator → |
| CVO Milwaukee-Eight 117 | 93 hp / 116 ft-lb | 105 hp / 128 ft-lb | 120 hp / 136 ft-lb | Open in calculator → |
Supporting Mods for the S&S Cycle 550C
- Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
- Recommended: A heavy-duty clutch spring. At around 130 ft-lb the stock clutch may start to slip.
S&S Cycle 550C vs Similar Cams
Other top-end power grinds on the Milwaukee-Eight 114, same supporting parts.
S&S Cycle 550C FAQ
How much horsepower does the S&S Cycle 550C add in a Stage 2 build?
On a Stage 1 Milwaukee-Eight 114 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the S&S Cycle 550C adds about 14 hp and 8 ft-lb at the rear wheel, for a Stage 2 build of roughly 110 hp / 130 ft-lb.
What engines does the S&S Cycle 550C fit?
The S&S Cycle 550C is listed for the Milwaukee-Eight 107, Milwaukee-Eight 114, Milwaukee-Eight 117, Milwaukee-Eight 117 High Output and CVO Milwaukee-Eight 117. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.
Does the S&S Cycle 550C need a tune?
Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.
Is the S&S Cycle 550C a good cam for me?
This is a top-end grind. It gives up some bottom-end grunt to make more power at higher rpm, and it rewards riders who like to rev the engine out.
Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.
Install the S&S Cycle 550C
Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.
Build it in the calculatorRequest a quote