Mon–Fri 9am–5pm · (902) 755-6532

Zipper's Red Shift · Mid-range

Zipper's Red Shift 468 Cam: Horsepower & Torque Gains

Well-rounded bolt-in grind.

This grind is built for the middle of the rev range, where most riders spend their time. Expect a stronger pull for passing and highway roll-ons than a pure torque cam.

Engine
M8 114
Est. output
105 hp
131 ft-lb
Gain
+9 hp
+9 ft-lb
Rank
#15 hp
#11 torque of 15

Estimated Gains by Engine

Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Zipper's Red Shift 468, which makes it a Stage 2 build.

EngineStockStage 1Stage 2 with 468Try it
Milwaukee-Eight 10778 hp / 101 ft-lb88 hp / 111 ft-lb97 hp / 119 ft-lbOpen in calculator →
Milwaukee-Eight 11485 hp / 111 ft-lb96 hp / 122 ft-lb105 hp / 131 ft-lbOpen in calculator →
Milwaukee-Eight 11793 hp / 116 ft-lb105 hp / 128 ft-lb115 hp / 137 ft-lbOpen in calculator →
Milwaukee-Eight 117 High Output103 hp / 118 ft-lb112 hp / 126 ft-lb123 hp / 135 ft-lbOpen in calculator →
CVO Milwaukee-Eight 11793 hp / 116 ft-lb105 hp / 128 ft-lb115 hp / 137 ft-lbOpen in calculator →

Supporting Mods for the Zipper's Red Shift 468

  • Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
  • Recommended: A heavy-duty clutch spring. At around 131 ft-lb the stock clutch may start to slip.

Zipper's Red Shift 468 FAQ

How much horsepower does the Zipper's Red Shift 468 add in a Stage 2 build?

On a Stage 1 Milwaukee-Eight 114 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Zipper's Red Shift 468 adds about 9 hp and 9 ft-lb at the rear wheel, for a Stage 2 build of roughly 105 hp / 131 ft-lb.

What engines does the Zipper's Red Shift 468 fit?

The Zipper's Red Shift 468 is listed for the Milwaukee-Eight 107, Milwaukee-Eight 114, Milwaukee-Eight 117, Milwaukee-Eight 117 High Output and CVO Milwaukee-Eight 117. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.

Does the Zipper's Red Shift 468 need a tune?

Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.

Is the Zipper's Red Shift 468 a good cam for me?

This grind is built for the middle of the rev range, where most riders spend their time. Expect a stronger pull for passing and highway roll-ons than a pure torque cam.

Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.

Install the Zipper's Red Shift 468

Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.

Build it in the calculatorRequest a quote
(902) 755-6532
Book Service