Andrews · Low-end torque
Andrews EV27 Cam: Horsepower & Torque Gains
Bolt-in Evo favourite with strong low-end.
This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.
Estimated Gains by Engine
Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Andrews EV27, which makes it a Stage 2 build.
| Engine | Stock | Stage 1 | Stage 2 with EV27 | Try it |
|---|---|---|---|---|
| Evolution 80 (Big Twin) | 57 hp / 68 ft-lb | 65 hp / 74 ft-lb | 71 hp / 81 ft-lb | Open in calculator → |
Supporting Mods for the Andrews EV27
- Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
- Consider: A programmable ignition so timing can be matched to the new cam.
Andrews EV27 vs Similar Cams
Other low-end torque grinds on the Evolution 80 (Big Twin), same supporting parts.
Full Harley cam comparison chart →Andrews EV27 FAQ
How much horsepower does the Andrews EV27 add in a Stage 2 build?
On a Stage 1 Evolution 80 (Big Twin) (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Andrews EV27 adds about 6 hp and 7 ft-lb at the rear wheel, for a Stage 2 build of roughly 71 hp / 81 ft-lb.
What engines does the Andrews EV27 fit?
The Andrews EV27 is listed for the Evolution 80 (Big Twin). Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.
Does the Andrews EV27 need a tune?
Yes. On a carbureted engine, plan on re-jetting or a performance carb, and a programmable ignition helps match timing to the new cam.
Is the Andrews EV27 a good cam for me?
This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.
Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.
Install the Andrews EV27
Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.
Build it in the calculatorRequest a quote