Screamin' Eagle · Mid-range
Screamin' Eagle SE-259E Cam: Horsepower & Torque Gains
Developed for EFI engines. Works best on 103 ci and up with free-flowing intake and exhaust.
This grind is built for the middle of the rev range, where most riders spend their time. Expect a stronger pull for passing and highway roll-ons than a pure torque cam.
Estimated Gains by Engine
Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Screamin' Eagle SE-259E, which makes it a Stage 2 build. Twin Cam numbers are calibrated against Fuel Moto's back-to-back Twin Cam 103 cam shootout.
| Engine | Stock | Stage 1 | Stage 2 with SE-259E | Try it |
|---|---|---|---|---|
| Twin Cam 110 | 88 hp / 100 ft-lb | 99 hp / 110 ft-lb | 111 hp / 118 ft-lb | Open in calculator → |
| Twin Cam 103 | 76 hp / 90 ft-lb | 85 hp / 99 ft-lb | 96 hp / 106 ft-lb | Open in calculator → |
| Twin Cam 96 | 69 hp / 82 ft-lb | 78 hp / 90 ft-lb | 85 hp / 96 ft-lb | Open in calculator → |
| Twin Cam 88 | 63 hp / 73 ft-lb | 71 hp / 81 ft-lb | 78 hp / 85 ft-lb | Open in calculator → |
Supporting Mods for the Screamin' Eagle SE-259E
- Consider: This grind makes its best power with more displacement or compression, so it's usually paired with a big bore kit.
- Required: Hydraulic cam chain tensioners. The stock shoe-style tensioners wear out, and a cam install is the time to replace them.
- Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
- Consider: Performance lifters to go with a higher-lift cam.
- Consider: A high-performance oil pump for better oiling in a built Twin Cam.
Screamin' Eagle SE-259E vs Similar Cams
Other mid-range grinds on the Twin Cam 103, same supporting parts.
Screamin' Eagle SE-259E FAQ
How much horsepower does the Screamin' Eagle SE-259E add in a Stage 2 build?
On a Stage 1 Twin Cam 103 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Screamin' Eagle SE-259E adds about 11 hp and 7 ft-lb at the rear wheel, for a Stage 2 build of roughly 96 hp / 106 ft-lb.
What engines does the Screamin' Eagle SE-259E fit?
The Screamin' Eagle SE-259E is listed for the Twin Cam 110, Twin Cam 103, Twin Cam 96 and Twin Cam 88. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.
Does the Screamin' Eagle SE-259E need a tune?
Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.
Is the Screamin' Eagle SE-259E a good cam for me?
This grind is built for the middle of the rev range, where most riders spend their time. Expect a stronger pull for passing and highway roll-ons than a pure torque cam. It works best with more displacement or compression, so it's usually paired with a big bore kit or a higher-compression build.
Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.
Install the Screamin' Eagle SE-259E
Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.
Build it in the calculatorRequest a quote