Mon–Fri 9am–5pm · (902) 755-6532

Andrews · Mid-range

Andrews TS570 Cam: Horsepower & Torque Gains

Hotter Thunder Stroke grind: .570" lift, 228°/232° duration.

This grind is built for the middle of the rev range, where most riders spend their time. Expect a stronger pull for passing and highway roll-ons than a pure torque cam.

Engine
Indian Thunder Stroke 111
Est. output
91 hp
120 ft-lb
Gain
+9 hp
+5 ft-lb
Rank
#1 hp
#2 torque of 3

Estimated Gains by Engine

Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Andrews TS570, which makes it a Stage 2 build.

EngineStockStage 1Stage 2 with TS570Try it
Indian Thunder Stroke 11174 hp / 106 ft-lb82 hp / 115 ft-lb91 hp / 120 ft-lbOpen in calculator →
Indian Thunder Stroke 11685 hp / 116 ft-lb94 hp / 126 ft-lb104 hp / 132 ft-lbOpen in calculator →

Supporting Mods for the Andrews TS570

  • Consider: This grind makes its best power with more displacement or compression, so it's usually paired with a big bore kit.
  • Recommended: A heavy-duty clutch spring. At around 120 ft-lb the stock clutch may start to slip.

Andrews TS570 vs Similar Cams

Other mid-range grinds on the Indian Thunder Stroke 111, same supporting parts.

Full Harley cam comparison chart →

Andrews TS570 FAQ

How much horsepower does the Andrews TS570 add in a Stage 2 build?

On a Stage 1 Indian Thunder Stroke 111 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Andrews TS570 adds about 9 hp and 5 ft-lb at the rear wheel, for a Stage 2 build of roughly 91 hp / 120 ft-lb.

What engines does the Andrews TS570 fit?

The Andrews TS570 is listed for the Indian Thunder Stroke 111 and Indian Thunder Stroke 116. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.

Does the Andrews TS570 need a tune?

Yes. On a carbureted engine, plan on re-jetting or a performance carb, and a programmable ignition helps match timing to the new cam.

Is the Andrews TS570 a good cam for me?

This grind is built for the middle of the rev range, where most riders spend their time. Expect a stronger pull for passing and highway roll-ons than a pure torque cam. It works best with more displacement or compression, so it's usually paired with a big bore kit or a higher-compression build.

Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.

Install the Andrews TS570

Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.

Build it in the calculatorRequest a quote
(902) 755-6532
Book Service