Mon–Fri 9am–5pm · (902) 755-6532

Wood Performance · Top-end power

Wood Performance TW-999-6a Cam: Horsepower & Torque Gains

Top performer in Fuel Moto's 103 test. Strongest from 3,000 rpm up.

This is a top-end grind. It gives up some bottom-end grunt to make more power at higher rpm, and it rewards riders who like to rev the engine out.

Engine
Twin Cam 103
Est. output
98 hp
110 ft-lb
Gain
+13 hp
+11 ft-lb
Rank
#1 hp
#1 torque of 24

Estimated Gains by Engine

Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Wood Performance TW-999-6a, which makes it a Stage 2 build. Twin Cam numbers are calibrated against Fuel Moto's back-to-back Twin Cam 103 cam shootout.

EngineStockStage 1Stage 2 with TW-999-6aTry it
Twin Cam 11088 hp / 100 ft-lb99 hp / 110 ft-lb114 hp / 122 ft-lbOpen in calculator →
Twin Cam 10376 hp / 90 ft-lb85 hp / 99 ft-lb98 hp / 110 ft-lbOpen in calculator →
Twin Cam 9669 hp / 82 ft-lb78 hp / 90 ft-lb87 hp / 98 ft-lbOpen in calculator →
Twin Cam 8863 hp / 73 ft-lb71 hp / 81 ft-lb79 hp / 87 ft-lbOpen in calculator →

Supporting Mods for the Wood Performance TW-999-6a

  • Consider: This grind makes its best power with more displacement or compression, so it's usually paired with a big bore kit.
  • Required: Hydraulic cam chain tensioners. The stock shoe-style tensioners wear out, and a cam install is the time to replace them.
  • Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
  • Consider: Performance lifters to go with a higher-lift cam.
  • Consider: A high-performance oil pump for better oiling in a built Twin Cam.

Wood Performance TW-999-6a vs Similar Cams

Other top-end power grinds on the Twin Cam 103, same supporting parts.

Full Harley cam comparison chart →

Wood Performance TW-999-6a FAQ

How much horsepower does the Wood Performance TW-999-6a add in a Stage 2 build?

On a Stage 1 Twin Cam 103 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Wood Performance TW-999-6a adds about 13 hp and 11 ft-lb at the rear wheel, for a Stage 2 build of roughly 98 hp / 110 ft-lb.

What engines does the Wood Performance TW-999-6a fit?

The Wood Performance TW-999-6a is listed for the Twin Cam 110, Twin Cam 103, Twin Cam 96 and Twin Cam 88. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.

Does the Wood Performance TW-999-6a need a tune?

Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.

Is the Wood Performance TW-999-6a a good cam for me?

This is a top-end grind. It gives up some bottom-end grunt to make more power at higher rpm, and it rewards riders who like to rev the engine out. It works best with more displacement or compression, so it's usually paired with a big bore kit or a higher-compression build.

Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.

Install the Wood Performance TW-999-6a

Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.

Build it in the calculatorRequest a quote
(902) 755-6532
Book Service