Mon–Fri 9am–5pm · (902) 755-6532

Feuling · Top-end power

Feuling Reaper 592 Cam: Horsepower & Torque Gains

"The big nasty." 2,850–6,250 rpm, best on modified engines.

This is a top-end grind. It gives up some bottom-end grunt to make more power at higher rpm, and it rewards riders who like to rev the engine out.

Engine
M8 114
Est. output
109 hp
127 ft-lb
Gain
+13 hp
+5 ft-lb
Rank
#5 hp
#15 torque of 15

Estimated Gains by Engine

Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Feuling Reaper 592, which makes it a Stage 2 build.

EngineStockStage 1Stage 2 with Reaper 592Try it
Milwaukee-Eight 10778 hp / 101 ft-lb88 hp / 111 ft-lb100 hp / 116 ft-lbOpen in calculator →
Milwaukee-Eight 11485 hp / 111 ft-lb96 hp / 122 ft-lb109 hp / 127 ft-lbOpen in calculator →
Milwaukee-Eight 11793 hp / 116 ft-lb105 hp / 128 ft-lb119 hp / 133 ft-lbOpen in calculator →
Milwaukee-Eight 117 High Output103 hp / 118 ft-lb112 hp / 126 ft-lb127 hp / 131 ft-lbOpen in calculator →
CVO Milwaukee-Eight 11793 hp / 116 ft-lb105 hp / 128 ft-lb119 hp / 133 ft-lbOpen in calculator →

Supporting Mods for the Feuling Reaper 592

  • Consider: This grind makes its best power with more displacement or compression, so it's usually paired with a big bore kit.
  • Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
  • Recommended: A heavy-duty clutch spring. At around 127 ft-lb the stock clutch may start to slip.
  • Consider: The Feuling Reaper 592 makes its best power with more displacement or compression. A milder grind may suit a 114 ci engine better.
  • Consider: Performance lifters to go with a higher-lift cam.

Feuling Reaper 592 FAQ

How much horsepower does the Feuling Reaper 592 add in a Stage 2 build?

On a Stage 1 Milwaukee-Eight 114 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Feuling Reaper 592 adds about 13 hp and 5 ft-lb at the rear wheel, for a Stage 2 build of roughly 109 hp / 127 ft-lb.

What engines does the Feuling Reaper 592 fit?

The Feuling Reaper 592 is listed for the Milwaukee-Eight 107, Milwaukee-Eight 114, Milwaukee-Eight 117, Milwaukee-Eight 117 High Output and CVO Milwaukee-Eight 117. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.

Does the Feuling Reaper 592 need a tune?

Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.

Is the Feuling Reaper 592 a good cam for me?

This is a top-end grind. It gives up some bottom-end grunt to make more power at higher rpm, and it rewards riders who like to rev the engine out. It works best with more displacement or compression, so it's usually paired with a big bore kit or a higher-compression build.

Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.

Install the Feuling Reaper 592

Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.

Build it in the calculatorRequest a quote
(902) 755-6532
Book Service