Milwaukee-Eight · 2017–present
Milwaukee-Eight 114 Horsepower Calculator
A stock Milwaukee-Eight 114 makes about 85 hp and 111 ft-lb at the rear wheel. Found in the Softail 114 models, Touring Limited, Street Glide Special, Road Glide Special and more. Add the parts on your bike and the ones you're considering to estimate what your build will make.
1Choose your engine
Softail 114 models, Touring Limited, Street Glide Special, Road Glide Special and more.
2Your parts
Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.
Fills in a typical parts list for that stage. You can change any part afterwards.
Air intake
A high-flow air cleaner lets the engine breathe.
Exhaust
2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.
EFI tuner
Required on fuel-injected bikes once you change intake, exhaust or internals.
Camshaft
The single biggest bolt-in change to how your engine pulls.
Big bore / stroker kit
More displacement means more power and torque everywhere.
Cylinder heads
Better airflow through the heads. Pays off most with a cam or big bore.
Throttle body
More airflow for big-inch and ported-head builds.
Supporting parts
No horsepower on their own, but they keep a modified engine reliable.
Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.
Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.
Estimated power curve
An illustration of where your Milwaukee-Eight 114 makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.
Horsepower
hp at the rear wheelTorque
ft-lb at the rear wheelAdd parts or pick a stage above to compare your build with stock.
Milwaukee-Eight 114 Stage 1, 2, 3 & 4 Horsepower
Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.
| Stage | Typical parts | Est. hp | Est. ft-lb | |
|---|---|---|---|---|
| Stock | — | 85 | 111 | |
| Stage 1 | S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune) | 96 | 122 | Open → |
| Stage 2 | S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Screamin' Eagle SE8-462, S&S Cycle Quickee Adjustable Pushrods | 105 | 132 | Open → |
| Stage 3 | S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Screamin' Eagle SE8-462, S&S Cycle 124 Big Bore Kit, S&S Cycle Quickee Adjustable Pushrods, Barnett Heavy-Duty Clutch Spring | 114 | 144 | Open → |
| Stage 4 | S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Screamin' Eagle SE8-462, S&S Cycle 124 Big Bore Kit, Screamin' Eagle CNC-Ported Heads, S&S Cycle Quickee Adjustable Pushrods, Barnett Heavy-Duty Clutch Spring | 121 | 150 | Open → |
Best Cams for the Milwaukee-Eight 114
Estimated rear-wheel output for every cam in our database on a Milwaukee-Eight 114 with a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune (≈ 96 hp / 122 ft-lb before the cam).
| Cam | Character | Est. hp | Est. ft-lb | Gain |
|---|---|---|---|---|
| Screamin' Eagle SE8-517 | Top-end power | 110 | 130 | +14 hp / +8 ft-lb |
| S&S Cycle 550C | Top-end power | 110 | 130 | +14 hp / +8 ft-lb |
| Wood Performance WM8-777 | Top-end power | 109 | 131 | +13 hp / +9 ft-lb |
| S&S Cycle 590C | Top-end power | 109 | 127 | +13 hp / +5 ft-lb |
| Feuling Reaper 592 | Top-end power | 109 | 127 | +13 hp / +5 ft-lb |
| Screamin' Eagle SE8-511 | Mid-range | 108 | 131 | +12 hp / +9 ft-lb |
| Feuling Reaper 508 | Mid-range | 108 | 131 | +12 hp / +9 ft-lb |
| Wood Performance WM8-222 | Mid-range | 107 | 132 | +11 hp / +10 ft-lb |
| S&S Cycle 475C | Mid-range | 107 | 132 | +11 hp / +10 ft-lb |
| Feuling Reaper 521 | Low-end torque | 106 | 132 | +10 hp / +10 ft-lb |
| Cycle-Rama CR-460 | Mid-range | 106 | 132 | +10 hp / +10 ft-lb |
| Wood Performance WM8-22X | Low-end torque | 105 | 133 | +9 hp / +11 ft-lb |
| Screamin' Eagle SE8-462 | Low-end torque | 105 | 132 | +9 hp / +10 ft-lb |
| Andrews M460 | Low-end torque | 105 | 132 | +9 hp / +10 ft-lb |
| Zipper's Red Shift 468 | Mid-range | 105 | 131 | +9 hp / +9 ft-lb |
Want a side-by-side across all engines? See the Harley cam comparison chart.
Exhaust Options for the Milwaukee-Eight 114
Estimated gain from each exhaust on a Milwaukee-Eight 114 that already has a high-flow intake and a custom tune. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.
| Exhaust | Type | Est. gain |
|---|---|---|
| Vance & Hines Pro Pipe 2-into-1 | 2-into-1 · Power | +5 hp / +4 ft-lb |
| Vance & Hines Hi-Output 2-into-1 | 2-into-1 · Power | +5 hp / +4 ft-lb |
| Bassani Road Rage 2-into-1 | 2-into-1 · Power | +5 hp / +4 ft-lb |
| D&D Fat Cat 2-into-1 | 2-into-1 · Power | +5 hp / +6 ft-lb |
| Two Brothers Racing Comp-S 2-into-1 | 2-into-1 · Power | +5 hp / +4 ft-lb |
| S&S Cycle SuperStreet 2-into-1 | 2-into-1 · Power | +5 hp / +4 ft-lb |
| Rinehart Racing True Duals (2-into-2) | True duals · Sound | +3 hp / +2 ft-lb |
| Vance & Hines Eliminator 300 Slip-Ons | Slip-on · Sound | +2 hp / +2 ft-lb |
| Rinehart Racing 4" Slip-On Mufflers | Slip-on · Sound | +2 hp / +2 ft-lb |
| Screamin' Eagle Street Cannon Slip-Ons | Slip-on · Sound | +2 hp / +2 ft-lb |
| Vance & Hines Big Shots Long (2-into-2) | Drag pipes · Sound | +1 hp / -1 ft-lb |
Milwaukee-Eight 114 Big Bore Kits
Estimated output with the kit, a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, and a matched torque cam.
| Kit | Displacement | Est. hp | Est. ft-lb |
|---|---|---|---|
| S&S Cycle 124 Big Bore Kit + Feuling Reaper 521 | 114 → 124 ci | 115 | 144 |
| Screamin' Eagle 128 Stroker Kit + Feuling Reaper 521 | 114 → 128 ci | 119 | 148 |
Milwaukee-Eight 114 FAQ
How much horsepower does a stock Milwaukee-Eight 114 make?
A healthy stock Milwaukee-Eight 114 makes roughly 85 hp and 111 ft-lb of torque at the rear wheel. Factory figures are measured at the crankshaft, so they're higher than what a dyno shows at the wheel.
How much horsepower does a Stage 1 Milwaukee-Eight 114 make?
A Stage 1 Milwaukee-Eight 114 (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 96 hp and 122 ft-lb at the rear wheel, about 11 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1 and Dynojet Power Vision 3 (custom dyno tune).
How much horsepower does a Stage 2 Milwaukee-Eight 114 make?
A Stage 2 Milwaukee-Eight 114 (Stage 1 plus a performance cam) makes roughly 105 hp and 132 ft-lb at the rear wheel, about 20 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Screamin' Eagle SE8-462 and S&S Cycle Quickee Adjustable Pushrods.
How much horsepower does a Stage 3 Milwaukee-Eight 114 make?
A Stage 3 Milwaukee-Eight 114 (Stage 2 plus a big bore kit) makes roughly 114 hp and 144 ft-lb at the rear wheel, about 29 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Screamin' Eagle SE8-462, S&S Cycle 124 Big Bore Kit, S&S Cycle Quickee Adjustable Pushrods and Barnett Heavy-Duty Clutch Spring.
How much horsepower does a cam add to a Milwaukee-Eight 114?
On top of a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, a cam takes a Milwaukee-Eight 114 to roughly 105–110 hp depending on the grind. In our estimates the Screamin' Eagle SE8-517 makes the most peak power (≈ 110 hp) and the Wood Performance WM8-22X makes the most torque (≈ 133 ft-lb).
Does a Milwaukee-Eight 114 need a tune after an exhaust or air cleaner?
Yes. A freer intake or exhaust makes a fuel-injected engine run lean on the stock tune, which costs power and adds heat. A tuner like the Dynojet Power Vision with a custom dyno tune gets the full gain.
Other Engines
Build it with Arch Customs
Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.
Start from intake, exhaust & tune →