Screamin' Eagle · Low-end torque
Screamin' Eagle SE-255 Cam: Horsepower & Torque Gains
Low-end torque emphasis, ideal below 4,500 rpm.
This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.
Estimated Gains by Engine
Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Screamin' Eagle SE-255, which makes it a Stage 2 build. Twin Cam numbers are calibrated against Fuel Moto's back-to-back Twin Cam 103 cam shootout.
| Engine | Stock | Stage 1 | Stage 2 with SE-255 | Try it |
|---|---|---|---|---|
| Twin Cam 110 | 88 hp / 100 ft-lb | 99 hp / 110 ft-lb | 106 hp / 118 ft-lb | Open in calculator → |
| Twin Cam 103 | 76 hp / 90 ft-lb | 85 hp / 99 ft-lb | 91 hp / 106 ft-lb | Open in calculator → |
| Twin Cam 96 | 69 hp / 82 ft-lb | 78 hp / 90 ft-lb | 83 hp / 97 ft-lb | Open in calculator → |
| Twin Cam 88 | 63 hp / 73 ft-lb | 71 hp / 81 ft-lb | 76 hp / 86 ft-lb | Open in calculator → |
Supporting Mods for the Screamin' Eagle SE-255
- Required: Hydraulic cam chain tensioners. The stock shoe-style tensioners wear out, and a cam install is the time to replace them.
- Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
Screamin' Eagle SE-255 vs Similar Cams
Other low-end torque grinds on the Twin Cam 103, same supporting parts.
Screamin' Eagle SE-255 FAQ
How much horsepower does the Screamin' Eagle SE-255 add in a Stage 2 build?
On a Stage 1 Twin Cam 103 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Screamin' Eagle SE-255 adds about 6 hp and 7 ft-lb at the rear wheel, for a Stage 2 build of roughly 91 hp / 106 ft-lb.
What engines does the Screamin' Eagle SE-255 fit?
The Screamin' Eagle SE-255 is listed for the Twin Cam 110, Twin Cam 103, Twin Cam 96 and Twin Cam 88. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.
Does the Screamin' Eagle SE-255 need a tune?
Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.
Is the Screamin' Eagle SE-255 a good cam for me?
This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.
Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.
Install the Screamin' Eagle SE-255
Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.
Build it in the calculatorRequest a quote