Andrews · Mid-range
Andrews EV46 Cam: Horsepower & Torque Gains
Livelier grind for a breathing-modified Evo.
This grind is built for the middle of the rev range, where most riders spend their time. Expect a stronger pull for passing and highway roll-ons than a pure torque cam.
Estimated Gains by Engine
Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the Andrews EV46, which makes it a Stage 2 build.
| Engine | Stock | Stage 1 | Stage 2 with EV46 | Try it |
|---|---|---|---|---|
| Evolution 80 (Big Twin) | 57 hp / 68 ft-lb | 65 hp / 74 ft-lb | 73 hp / 79 ft-lb | Open in calculator → |
Supporting Mods for the Andrews EV46
- Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
- Consider: A programmable ignition so timing can be matched to the new cam.
Andrews EV46 vs Similar Cams
Other mid-range grinds on the Evolution 80 (Big Twin), same supporting parts.
Full Harley cam comparison chart →Andrews EV46 FAQ
How much horsepower does the Andrews EV46 add in a Stage 2 build?
On a Stage 1 Evolution 80 (Big Twin) (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the Andrews EV46 adds about 8 hp and 5 ft-lb at the rear wheel, for a Stage 2 build of roughly 73 hp / 79 ft-lb.
What engines does the Andrews EV46 fit?
The Andrews EV46 is listed for the Evolution 80 (Big Twin). Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.
Does the Andrews EV46 need a tune?
Yes. On a carbureted engine, plan on re-jetting or a performance carb, and a programmable ignition helps match timing to the new cam.
Is the Andrews EV46 a good cam for me?
This grind is built for the middle of the rev range, where most riders spend their time. Expect a stronger pull for passing and highway roll-ons than a pure torque cam.
Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.
Install the Andrews EV46
Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.
Build it in the calculatorRequest a quote