S&S Cycle · Top-end power
S&S Cycle 590C Cam: Horsepower & Torque Gains
All-out horsepower cam designed for 124 ci and larger engines.
This is a top-end grind. It gives up some bottom-end grunt to make more power at higher rpm, and it rewards riders who like to rev the engine out.
Estimated Gains by Engine
Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the S&S Cycle 590C, which makes it a Stage 2 build.
| Engine | Stock | Stage 1 | Stage 2 with 590C | Try it |
|---|---|---|---|---|
| Milwaukee-Eight 107 | 78 hp / 101 ft-lb | 88 hp / 111 ft-lb | 100 hp / 116 ft-lb | Open in calculator → |
| Milwaukee-Eight 114 | 85 hp / 111 ft-lb | 96 hp / 122 ft-lb | 109 hp / 127 ft-lb | Open in calculator → |
| Milwaukee-Eight 117 | 93 hp / 116 ft-lb | 105 hp / 128 ft-lb | 120 hp / 133 ft-lb | Open in calculator → |
| Milwaukee-Eight 117 High Output | 103 hp / 118 ft-lb | 112 hp / 126 ft-lb | 128 hp / 131 ft-lb | Open in calculator → |
| CVO Milwaukee-Eight 117 | 93 hp / 116 ft-lb | 105 hp / 128 ft-lb | 120 hp / 133 ft-lb | Open in calculator → |
Supporting Mods for the S&S Cycle 590C
- Consider: This grind makes its best power with more displacement or compression, so it's usually paired with a big bore kit.
- Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.
- Recommended: A heavy-duty clutch spring. At around 127 ft-lb the stock clutch may start to slip.
- Consider: The S&S Cycle 590C makes its best power with more displacement or compression. A milder grind may suit a 114 ci engine better.
- Consider: Performance lifters to go with a higher-lift cam.
S&S Cycle 590C vs Similar Cams
Other top-end power grinds on the Milwaukee-Eight 114, same supporting parts.
S&S Cycle 590C FAQ
How much horsepower does the S&S Cycle 590C add in a Stage 2 build?
On a Stage 1 Milwaukee-Eight 114 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the S&S Cycle 590C adds about 13 hp and 5 ft-lb at the rear wheel, for a Stage 2 build of roughly 109 hp / 127 ft-lb.
What engines does the S&S Cycle 590C fit?
The S&S Cycle 590C is listed for the Milwaukee-Eight 107, Milwaukee-Eight 114, Milwaukee-Eight 117, Milwaukee-Eight 117 High Output and CVO Milwaukee-Eight 117. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.
Does the S&S Cycle 590C need a tune?
Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.
Is the S&S Cycle 590C a good cam for me?
This is a top-end grind. It gives up some bottom-end grunt to make more power at higher rpm, and it rewards riders who like to rev the engine out. It works best with more displacement or compression, so it's usually paired with a big bore kit or a higher-compression build.
Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.
Install the S&S Cycle 590C
Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.
Build it in the calculatorRequest a quote