Mon–Fri 9am–5pm · (902) 755-6532

S&S Cycle · Low-end torque

S&S Cycle 583 Cam: Horsepower & Torque Gains

Broad torque with a sweet spot from 1,500 to 4,000 rpm.

This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.

Engine
Twin Cam 103
Est. output
92 hp
108 ft-lb
Gain
+7 hp
+9 ft-lb
Rank
#19 hp
#12 torque of 24

Estimated Gains by Engine

Rear-wheel estimates for a Stage 1 engine (high-flow air cleaner, 2-into-1 exhaust and custom tune, or a performance carb) before and after the S&S Cycle 583, which makes it a Stage 2 build. Twin Cam numbers are calibrated against Fuel Moto's back-to-back Twin Cam 103 cam shootout.

EngineStockStage 1Stage 2 with 583Try it
Twin Cam 11088 hp / 100 ft-lb99 hp / 110 ft-lb107 hp / 120 ft-lbOpen in calculator →
Twin Cam 10376 hp / 90 ft-lb85 hp / 99 ft-lb92 hp / 108 ft-lbOpen in calculator →
Twin Cam 9669 hp / 82 ft-lb78 hp / 90 ft-lb84 hp / 99 ft-lbOpen in calculator →
Twin Cam 8863 hp / 73 ft-lb71 hp / 81 ft-lb76 hp / 88 ft-lbOpen in calculator →

Supporting Mods for the S&S Cycle 583

  • Required: Hydraulic cam chain tensioners. The stock shoe-style tensioners wear out, and a cam install is the time to replace them.
  • Recommended: Adjustable pushrods. They let us install the cam without pulling the rocker boxes, saving labour.

S&S Cycle 583 FAQ

How much horsepower does the S&S Cycle 583 add in a Stage 2 build?

On a Stage 1 Twin Cam 103 (high-flow intake, 2-into-1 exhaust and a custom tune), we estimate the S&S Cycle 583 adds about 7 hp and 9 ft-lb at the rear wheel, for a Stage 2 build of roughly 92 hp / 108 ft-lb.

What engines does the S&S Cycle 583 fit?

The S&S Cycle 583 is listed for the Twin Cam 110, Twin Cam 103, Twin Cam 96 and Twin Cam 88. Fitment can vary by model year, so we confirm compatibility with your exact bike before ordering.

Does the S&S Cycle 583 need a tune?

Yes. A cam changes how much air the engine moves, so a fuel-injected Harley needs a tuner and tune (ideally a custom dyno tune) to run properly and make the gain.

Is the S&S Cycle 583 a good cam for me?

This is a torque-focused grind. It pulls hard from low rpm, keeps the bike easy to ride in traffic, and suits heavy touring bikes and two-up riding.

Estimates for a healthy engine. Real results depend on condition, the rest of the build, the tune and the dyno.

Install the S&S Cycle 583

Arch Customs installs and dyno tunes Harley cams at our shop in Stellarton, Nova Scotia, with tensioners, pushrods and every supporting part done right.

Build it in the calculatorRequest a quote
(902) 755-6532
Book Service