Indian Thunder Stroke · 2014–2019
Indian Thunder Stroke 111 Horsepower Calculator
A stock Indian Thunder Stroke 111 makes about 74 hp and 106 ft-lb at the rear wheel. Found in the Indian Chief, Chieftain, Roadmaster, Springfield and Vintage. Add the parts on your bike and the ones you're considering to estimate what your build will make.
1Choose your engine
Indian Chief, Chieftain, Roadmaster, Springfield and Vintage.
2Your parts
Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.
Fills in a typical parts list for that stage. You can change any part afterwards.
Air intake
A high-flow air cleaner lets the engine breathe.
Exhaust
2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.
EFI tuner
Required on fuel-injected bikes once you change intake, exhaust or internals.
Camshaft
The single biggest bolt-in change to how your engine pulls.
Big bore / stroker kit
More displacement means more power and torque everywhere.
Supporting parts
No horsepower on their own, but they keep a modified engine reliable.
Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.
Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.
Estimated power curve
An illustration of where your Indian Thunder Stroke 111 makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.
Horsepower
hp at the rear wheelTorque
ft-lb at the rear wheelAdd parts or pick a stage above to compare your build with stock.
Indian Thunder Stroke 111 Stage 1, 2 & 3 Horsepower
Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.
| Stage | Typical parts | Est. hp | Est. ft-lb | |
|---|---|---|---|---|
| Stock | — | 74 | 106 | |
| Stage 1 | Indian Motorcycle Stage 1 High Performance Air Cleaner, Indian Motorcycle Stage 1 Mufflers, Dynojet Power Vision 3 (custom dyno tune) | 82 | 115 | Open → |
| Stage 2 | Indian Motorcycle Stage 1 High Performance Air Cleaner, Indian Motorcycle Stage 1 Mufflers, Dynojet Power Vision 3 (custom dyno tune), Indian Motorcycle Stage 2 Performance Cams | 88 | 120 | Open → |
| Stage 3 | Indian Motorcycle Stage 1 High Performance Air Cleaner, Indian Motorcycle Stage 1 Mufflers, Dynojet Power Vision 3 (custom dyno tune), Indian Motorcycle Stage 2 Performance Cams, Indian Motorcycle Thunder Stroke 116 Big Bore Kit, Barnett Heavy-Duty Clutch Spring | 92 | 126 | Open → |
Best Cams for the Indian Thunder Stroke 111
Estimated rear-wheel output for every cam in our database on a Indian Thunder Stroke 111 with a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune (≈ 82 hp / 115 ft-lb before the cam).
| Cam | Character | Est. hp | Est. ft-lb | Gain |
|---|---|---|---|---|
| Andrews TS570 | Mid-range | 91 | 120 | +9 hp / +5 ft-lb |
| Indian Motorcycle Stage 2 Performance Cams | Mid-range | 88 | 120 | +6 hp / +5 ft-lb |
| Andrews TS550 | Low-end torque | 88 | 122 | +6 hp / +7 ft-lb |
Want a side-by-side across all engines? See the Harley cam comparison chart.
Exhaust Options for the Indian Thunder Stroke 111
Estimated gain from each exhaust on a Indian Thunder Stroke 111 that already has a high-flow intake and a custom tune. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.
| Exhaust | Type | Est. gain |
|---|---|---|
| Indian Motorcycle Stage 1 Mufflers | Slip-on · Power | +3 hp / +3 ft-lb |
Indian Thunder Stroke 111 Big Bore Kits
Estimated output with the kit, a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, and a matched torque cam.
| Kit | Displacement | Est. hp | Est. ft-lb |
|---|---|---|---|
| Indian Motorcycle Thunder Stroke 116 Big Bore Kit + Andrews TS550 | 111 → 116 ci | 92 | 127 |
Indian Thunder Stroke 111 FAQ
How much horsepower does a stock Indian Thunder Stroke 111 make?
A healthy stock Indian Thunder Stroke 111 makes roughly 74 hp and 106 ft-lb of torque at the rear wheel. Factory figures are measured at the crankshaft, so they're higher than what a dyno shows at the wheel.
How much horsepower does a Stage 1 Indian Thunder Stroke 111 make?
A Stage 1 Indian Thunder Stroke 111 (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 82 hp and 115 ft-lb at the rear wheel, about 8 hp more than stock. A typical parts list is the Indian Motorcycle Stage 1 High Performance Air Cleaner, Indian Motorcycle Stage 1 Mufflers and Dynojet Power Vision 3 (custom dyno tune).
How much horsepower does a Stage 2 Indian Thunder Stroke 111 make?
A Stage 2 Indian Thunder Stroke 111 (Stage 1 plus a performance cam) makes roughly 88 hp and 120 ft-lb at the rear wheel, about 14 hp more than stock. A typical parts list is the Indian Motorcycle Stage 1 High Performance Air Cleaner, Indian Motorcycle Stage 1 Mufflers, Dynojet Power Vision 3 (custom dyno tune) and Indian Motorcycle Stage 2 Performance Cams.
How much horsepower does a Stage 3 Indian Thunder Stroke 111 make?
A Stage 3 Indian Thunder Stroke 111 (Stage 2 plus a big bore kit) makes roughly 92 hp and 126 ft-lb at the rear wheel, about 18 hp more than stock. A typical parts list is the Indian Motorcycle Stage 1 High Performance Air Cleaner, Indian Motorcycle Stage 1 Mufflers, Dynojet Power Vision 3 (custom dyno tune), Indian Motorcycle Stage 2 Performance Cams, Indian Motorcycle Thunder Stroke 116 Big Bore Kit and Barnett Heavy-Duty Clutch Spring.
How much horsepower does a cam add to a Indian Thunder Stroke 111?
On top of a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, a cam takes a Indian Thunder Stroke 111 to roughly 88–91 hp depending on the grind. In our estimates the Andrews TS570 makes the most peak power (≈ 91 hp) and the Andrews TS550 makes the most torque (≈ 122 ft-lb).
Does a Indian Thunder Stroke 111 need a tune after an exhaust or air cleaner?
Yes. A freer intake or exhaust makes a fuel-injected engine run lean on the stock tune, which costs power and adds heat. A tuner like the Dynojet Power Vision with a custom dyno tune gets the full gain.
Other Engines
Build it with Arch Customs
Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.
Start from intake, exhaust & tune →