Build Planner
Harley-Davidson Horsepower Calculator
Start from a Stage 1–4 preset, or add parts by manufacturer and model: Wood, S&S, Feuling, Screamin' Eagle, Vance & Hines and more. See what each part adds, which supporting mods it needs, and what the whole build should make at the rear wheel.
1Choose your engine
Touring and Softail (Street Glide, Road Glide, Road King, Fat Boy, Heritage and more).
2Your parts
Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.
Fills in a typical parts list for that stage. You can change any part afterwards.
Air intake
A high-flow air cleaner lets the engine breathe.
Exhaust
2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.
EFI tuner
Required on fuel-injected bikes once you change intake, exhaust or internals.
Camshaft
The single biggest bolt-in change to how your engine pulls.
Big bore / stroker kit
More displacement means more power and torque everywhere.
Cylinder heads
Better airflow through the heads. Pays off most with a cam or big bore.
Throttle body
More airflow for big-inch and ported-head builds.
Supporting parts
No horsepower on their own, but they keep a modified engine reliable.
Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.
Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.
Estimated power curve
An illustration of where your Milwaukee-Eight 107 makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.
Horsepower
hp at the rear wheelTorque
ft-lb at the rear wheelAdd parts or pick a stage above to compare your build with stock.
Stage 1, 2, 3 & 4 Horsepower by Harley Engine
Estimated rear-wheel horsepower and torque for a typical build at each stage. Stage 1 is a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune (or an S&S Super E carb on carbureted engines). Stage 2 adds a popular torque cam, Stage 3 a big bore kit, and Stage 4 ported heads. Click an engine for the full breakdown.
| Engine | Years | Stock | Stage 1 | Stage 2 | Stage 3 | Stage 4 |
|---|---|---|---|---|---|---|
| Milwaukee-Eight 107 | 2017–present | 78 hp / 101 ft-lb | 88 hp / 111 ft-lb | 97 hp / 120 ft-lb | 103 hp / 128 ft-lb | 109 hp / 133 ft-lb |
| Milwaukee-Eight 114 | 2017–present | 85 hp / 111 ft-lb | 96 hp / 122 ft-lb | 105 hp / 132 ft-lb | 114 hp / 144 ft-lb | 121 hp / 150 ft-lb |
| Milwaukee-Eight 117 | 2022–present | 93 hp / 116 ft-lb | 105 hp / 128 ft-lb | 115 hp / 138 ft-lb | — | — |
| Milwaukee-Eight 117 High Output | 2025–present | 103 hp / 118 ft-lb | 112 hp / 126 ft-lb | 123 hp / 136 ft-lb | — | — |
| Milwaukee-Eight VVT 117 | 2026–present | 91 hp / 117 ft-lb | 102 hp / 129 ft-lb | — | — | — |
| CVO Milwaukee-Eight 117 | 2018–2023 | 93 hp / 116 ft-lb | 105 hp / 128 ft-lb | 115 hp / 138 ft-lb | — | — |
| Milwaukee-Eight 121 VVT | 2023–present | 101 hp / 120 ft-lb | 114 hp / 132 ft-lb | — | — | — |
| Milwaukee-Eight 121 High Output VVT | 2025–present | 109 hp / 127 ft-lb | 123 hp / 140 ft-lb | — | — | — |
| Screamin' Eagle 131 Crate Engine | 2020–present | 121 hp / 131 ft-lb | 131 hp / 139 ft-lb | — | — | — |
| Screamin' Eagle 135 Stage IV Crate Engine | 2023–present | 126 hp / 141 ft-lb | 132 hp / 145 ft-lb | — | — | — |
| Twin Cam 110 | 2007–2017 | 88 hp / 100 ft-lb | 99 hp / 110 ft-lb | 111 hp / 121 ft-lb | — | — |
| Twin Cam 103 | 2010–2017 | 76 hp / 90 ft-lb | 85 hp / 99 ft-lb | 96 hp / 109 ft-lb | 102 hp / 117 ft-lb | 108 hp / 121 ft-lb |
| Twin Cam 96 | 2007–2016 | 69 hp / 82 ft-lb | 78 hp / 90 ft-lb | 87 hp / 100 ft-lb | 93 hp / 107 ft-lb | 99 hp / 111 ft-lb |
| Twin Cam 88 | 1999–2006 | 63 hp / 73 ft-lb | 71 hp / 81 ft-lb | 79 hp / 89 ft-lb | 86 hp / 96 ft-lb | 91 hp / 99 ft-lb |
| Evolution 80 (Big Twin) | 1984–1999 | 57 hp / 68 ft-lb | 65 hp / 74 ft-lb | 71 hp / 81 ft-lb | — | — |
| Sportster 1200 (Evolution) | 1988–2021 | 59 hp / 67 ft-lb | 66 hp / 74 ft-lb | 74 hp / 80 ft-lb | 76 hp / 82 ft-lb | 80 hp / 85 ft-lb |
| Sportster 883 (Evolution) | 1986–2021 | 47 hp / 49 ft-lb | 53 hp / 54 ft-lb | 59 hp / 58 ft-lb | 73 hp / 76 ft-lb | 77 hp / 78 ft-lb |
| Shovelhead 80 | 1978–1984 | 45 hp / 56 ft-lb | 51 hp / 61 ft-lb | 56 hp / 65 ft-lb | — | — |
| Revolution Max 1250T | 2021–present | 110 hp / 85 ft-lb | 112 hp / 91 ft-lb | — | — | — |
| Indian Thunder Stroke 111 | 2014–2019 | 74 hp / 106 ft-lb | 82 hp / 115 ft-lb | 88 hp / 120 ft-lb | 92 hp / 126 ft-lb | — |
| Indian Thunder Stroke 116 | 2020–present | 85 hp / 116 ft-lb | 94 hp / 126 ft-lb | 101 hp / 132 ft-lb | — | — |
| Shovelhead 74 | 1966–1980 | 41 hp / 51 ft-lb | 46 hp / 55 ft-lb | 51 hp / 59 ft-lb | — | — |
Estimates only. Not shown: Knucklehead, Panhead and V-Rod. Call us to talk about those builds.
How We Plan a Build
Big numbers on paper don't mean much if the bike doesn't run well. We plan every performance job around how you actually ride: two-up touring, highway passing power, or a hot-rodded Softail for the weekend. The parts have to work together, and they have to be tuned together.
Every build starts with an inspection. There's no point adding cams to an engine with worn tensioners or a tired top end. Then you get a written quote, and the bike is finished with a proper dyno tune so it makes the power and runs cool and clean.
Want to learn more first? Our blog covers Milwaukee-Eight, Twin Cam, Evolution and Sportster engines in depth.
Calculator FAQ
What do Stage 1, Stage 2, Stage 3 and Stage 4 mean on a Harley?
They're shorthand for how far a build goes. Stage 1 is a high-flow air cleaner, a less restrictive exhaust and a tune. Stage 2 adds a performance cam. Stage 3 adds displacement with a big bore or stroker kit. Stage 4 usually adds ported cylinder heads on top of that. Exact parts vary by shop and manufacturer, so the calculator shows the specific parts behind each estimate.
How accurate is the horsepower calculator?
It's an estimate based on typical rear-wheel dyno results for similar builds on healthy engines. Real numbers depend on engine condition, mileage, exact parts, the quality of the tune, and the dyno used, so we show a likely range rather than a single promise. For a real number, we can dyno your bike before and after.
What supporting parts does a cam install need?
On a fuel-injected Harley, a tuner and tune are required. Twin Cams also need hydraulic cam chain tensioners. Adjustable pushrods are strongly recommended because they let the cam go in without pulling the rocker boxes. A freer intake and a 2-into-1 exhaust let the cam make its full power. The calculator flags all of these as you build.
Which cam should I choose?
It depends on how you ride. Torque-focused grinds like the Wood TW-222 and Andrews 48H (Twin Cam) or the Wood WM8-22X and Screamin' Eagle SE8-462 (Milwaukee-Eight) pull hard from low rpm and suit touring and two-up riding. Hotter grinds like the S&S 585, Wood TW-999-6a or Feuling Reaper 592 make more top-end power but work best with more displacement or compression. Compare them all in our Harley cam comparison chart.
My bike already has some upgrades. Can I include them?
Yes. In each section, choose "Already installed" for parts that are on your bike now and "Plan to add" for upgrades you're considering. The calculator shows what your bike makes now and after the planned work, skips recommendations for parts you already have, and measures replacements, like slip-ons to a 2-into-1, against what's already there. Anything not in the list can go in the "Other existing mods" box.
Do I need a tune after installing an exhaust or air cleaner?
On a fuel-injected Harley, yes. A freer-flowing intake or exhaust makes the engine run lean and hot on the stock tune, and you lose most of the gain. Carbureted bikes need the carb re-jetted for the same reason.
Are these rear-wheel or crank horsepower numbers?
Rear-wheel. Harley-Davidson's published figures are measured at the crankshaft and run higher, because some power is lost through the primary, transmission and final drive. Rear-wheel numbers are what a dyno measures and what you actually feel. Our stock figures are based on independent rear-wheel dyno tests. The exception on Harley's side is the Screamin' Eagle 131 and 135 crate engines, which Harley rates at the rear wheel.
What should I do when installing cams in a Twin Cam?
Upgrade the cam chain tensioners. The stock spring-loaded shoe tensioners on 1999–2017 Twin Cams wear out, and a cam job is the ideal time to switch to a hydraulic tensioner setup.
Can you install and tune these parts?
Yes. Arch Customs installs and tunes everything in the calculator at our shop in Stellarton, Nova Scotia, from a simple exhaust and tune to full big bore builds. Use the Book This Build button to send us your spec for a quote.
Horsepower Calculators by Engine
Detailed numbers for each engine: stock output, every cam, exhaust options and big bore kits. Or compare all 56 cams side by side in the Harley cam comparison chart.
Milwaukee-Eight
Evolution Big Twin
Sportster (Evolution)
Shovelhead
Revolution Max
Indian Thunder Stroke
Ready to Build It?
Exhaust and tune jobs to full big bore builds, installed and dyno tuned in Stellarton.