Mon–Fri 9am–5pm · (902) 755-6532

Milwaukee-Eight · 2017–present

Milwaukee-Eight 107 Horsepower Calculator

A stock Milwaukee-Eight 107 makes about 78 hp and 101 ft-lb at the rear wheel. Found in the Touring and Softail (Street Glide, Road Glide, Road King, Fat Boy, Heritage and more). Add the parts on your bike and the ones you're considering to estimate what your build will make.

Stock
78 hp
101 ft-lb
Stage 1
88 hp
111 ft-lb
Stage 2
97 hp
120 ft-lb
Stage 3
103 hp
128 ft-lb
78 hp / 101 ft-lbDetails ↓

1Choose your engine

Touring and Softail (Street Glide, Road Glide, Road King, Fat Boy, Heritage and more).

2Your parts

Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.

Quick start with a stage

Fills in a typical parts list for that stage. You can change any part afterwards.

Air intake

A high-flow air cleaner lets the engine breathe.

Exhaust

2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.

EFI tuner

Required on fuel-injected bikes once you change intake, exhaust or internals.

Camshaft

The single biggest bolt-in change to how your engine pulls.

Big bore / stroker kit

More displacement means more power and torque everywhere.

Cylinder heads

Better airflow through the heads. Pays off most with a cam or big bore.

Throttle body

More airflow for big-inch and ported-head builds.

Supporting parts

No horsepower on their own, but they keep a modified engine reliable.

S&S Cycle Quickee Adjustable PushrodsLets us install cams without pulling the rocker boxes.
Feuling Race Series Adjustable PushrodsStiff, adjustable pushrods for performance cams.
Feuling HP+ LiftersHigh-performance lifters for higher-lift cams.
Feuling HP+ Oil PumpImproved oil pressure and scavenging for built engines.
Barnett Heavy-Duty Clutch SpringHolds the extra torque so the clutch doesn't slip.

Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.

Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.

Estimated power curve

An illustration of where your Milwaukee-Eight 107 makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.

Stock

Horsepower

hp at the rear wheel
304050607080902,0002,5003,0003,5004,0004,5005,0005,500Stock 71

Torque

ft-lb at the rear wheel
607080901001102,0002,5003,0003,5004,0004,5005,0005,500Stock 66

Add parts or pick a stage above to compare your build with stock.

Milwaukee-Eight 107 Stage 1, 2, 3 & 4 Horsepower

Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.

StageTypical partsEst. hpEst. ft-lb
Stock—78101
Stage 1S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune)88111Open →
Stage 2S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Screamin' Eagle SE8-462, S&S Cycle Quickee Adjustable Pushrods97120Open →
Stage 3S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Screamin' Eagle SE8-462, Screamin' Eagle 114 Big Bore Kit, S&S Cycle Quickee Adjustable Pushrods, Barnett Heavy-Duty Clutch Spring103128Open →
Stage 4S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Screamin' Eagle SE8-462, Screamin' Eagle 114 Big Bore Kit, Screamin' Eagle CNC-Ported Heads, S&S Cycle Quickee Adjustable Pushrods, Barnett Heavy-Duty Clutch Spring109133Open →

Best Cams for the Milwaukee-Eight 107

Estimated rear-wheel output for every cam in our database on a Milwaukee-Eight 107 with a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune (≈ 88 hp / 111 ft-lb before the cam).

CamCharacterEst. hpEst. ft-lbGain
Screamin' Eagle SE8-517Top-end power101118+13 hp / +7 ft-lb
S&S Cycle 550CTop-end power101118+13 hp / +7 ft-lb
Wood Performance WM8-777Top-end power100119+12 hp / +8 ft-lb
S&S Cycle 590CTop-end power100116+12 hp / +5 ft-lb
Feuling Reaper 592Top-end power100116+12 hp / +5 ft-lb
Screamin' Eagle SE8-511Mid-range99119+11 hp / +8 ft-lb
Feuling Reaper 508Mid-range99119+11 hp / +8 ft-lb
Wood Performance WM8-222Mid-range98120+10 hp / +9 ft-lb
S&S Cycle 475CMid-range98120+10 hp / +9 ft-lb
Wood Performance WM8-22XLow-end torque97121+9 hp / +10 ft-lb
Screamin' Eagle SE8-462Low-end torque97120+9 hp / +9 ft-lb
Feuling Reaper 521Low-end torque97120+9 hp / +9 ft-lb
Andrews M460Low-end torque97120+9 hp / +9 ft-lb
Cycle-Rama CR-460Mid-range97120+9 hp / +9 ft-lb
Zipper's Red Shift 468Mid-range97119+9 hp / +8 ft-lb

Want a side-by-side across all engines? See the Harley cam comparison chart.

Exhaust Options for the Milwaukee-Eight 107

Estimated gain from each exhaust on a Milwaukee-Eight 107 that already has a high-flow intake and a custom tune. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.

ExhaustTypeEst. gain
Vance & Hines Pro Pipe 2-into-12-into-1 · Power+4 hp / +4 ft-lb
Vance & Hines Hi-Output 2-into-12-into-1 · Power+4 hp / +4 ft-lb
Bassani Road Rage 2-into-12-into-1 · Power+4 hp / +4 ft-lb
D&D Fat Cat 2-into-12-into-1 · Power+4 hp / +5 ft-lb
Two Brothers Racing Comp-S 2-into-12-into-1 · Power+4 hp / +4 ft-lb
S&S Cycle SuperStreet 2-into-12-into-1 · Power+4 hp / +4 ft-lb
Rinehart Racing True Duals (2-into-2)True duals · Sound+2 hp / +2 ft-lb
Vance & Hines Eliminator 300 Slip-OnsSlip-on · Sound+1 hp / +2 ft-lb
Rinehart Racing 4" Slip-On MufflersSlip-on · Sound+1 hp / +2 ft-lb
Screamin' Eagle Street Cannon Slip-OnsSlip-on · Sound+1 hp / +2 ft-lb
Vance & Hines Big Shots Long (2-into-2)Drag pipes · Sound0 hp / -1 ft-lb

Milwaukee-Eight 107 Big Bore Kits

Estimated output with the kit, a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, and a matched torque cam.

KitDisplacementEst. hpEst. ft-lb
Screamin' Eagle 114 Big Bore Kit + Wood Performance WM8-22X107 → 114 ci103129

Milwaukee-Eight 107 FAQ

How much horsepower does a stock Milwaukee-Eight 107 make?

A healthy stock Milwaukee-Eight 107 makes roughly 78 hp and 101 ft-lb of torque at the rear wheel. Factory figures are measured at the crankshaft, so they're higher than what a dyno shows at the wheel.

How much horsepower does a Stage 1 Milwaukee-Eight 107 make?

A Stage 1 Milwaukee-Eight 107 (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 88 hp and 111 ft-lb at the rear wheel, about 10 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1 and Dynojet Power Vision 3 (custom dyno tune).

How much horsepower does a Stage 2 Milwaukee-Eight 107 make?

A Stage 2 Milwaukee-Eight 107 (Stage 1 plus a performance cam) makes roughly 97 hp and 120 ft-lb at the rear wheel, about 19 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Screamin' Eagle SE8-462 and S&S Cycle Quickee Adjustable Pushrods.

How much horsepower does a Stage 3 Milwaukee-Eight 107 make?

A Stage 3 Milwaukee-Eight 107 (Stage 2 plus a big bore kit) makes roughly 103 hp and 128 ft-lb at the rear wheel, about 25 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Screamin' Eagle SE8-462, Screamin' Eagle 114 Big Bore Kit, S&S Cycle Quickee Adjustable Pushrods and Barnett Heavy-Duty Clutch Spring.

How much horsepower does a cam add to a Milwaukee-Eight 107?

On top of a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, a cam takes a Milwaukee-Eight 107 to roughly 97–101 hp depending on the grind. In our estimates the Screamin' Eagle SE8-517 makes the most peak power (≈ 101 hp) and the Wood Performance WM8-22X makes the most torque (≈ 121 ft-lb).

Does a Milwaukee-Eight 107 need a tune after an exhaust or air cleaner?

Yes. A freer intake or exhaust makes a fuel-injected engine run lean on the stock tune, which costs power and adds heat. A tuner like the Dynojet Power Vision with a custom dyno tune gets the full gain.

Other Engines

Build it with Arch Customs

Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.

Start from intake, exhaust & tune →
(902) 755-6532
Book Service