Milwaukee-Eight · 2018–2023
CVO Milwaukee-Eight 117 Horsepower Calculator
A stock CVO Milwaukee-Eight 117 makes about 93 hp and 116 ft-lb at the rear wheel. Found in the CVO Street Glide, CVO Road Glide, CVO Limited, CVO Road Glide Limited and CVO Tri Glide (non-VVT, Twin-Cooled). Add the parts on your bike and the ones you're considering to estimate what your build will make.
1Choose your engine
CVO Street Glide, CVO Road Glide, CVO Limited, CVO Road Glide Limited and CVO Tri Glide (non-VVT, Twin-Cooled).
2Your parts
Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.
Fills in a typical parts list for that stage. You can change any part afterwards.
Air intake
A high-flow air cleaner lets the engine breathe.
Exhaust
2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.
EFI tuner
Required on fuel-injected bikes once you change intake, exhaust or internals.
Camshaft
The single biggest bolt-in change to how your engine pulls.
Cylinder heads
Better airflow through the heads. Pays off most with a cam or big bore.
Throttle body
More airflow for big-inch and ported-head builds.
Supporting parts
No horsepower on their own, but they keep a modified engine reliable.
Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.
Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.
Estimated power curve
An illustration of where your CVO Milwaukee-Eight 117 makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.
Horsepower
hp at the rear wheelTorque
ft-lb at the rear wheelAdd parts or pick a stage above to compare your build with stock.
CVO Milwaukee-Eight 117 Stage 1 & 2 Horsepower
Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.
| Stage | Typical parts | Est. hp | Est. ft-lb | |
|---|---|---|---|---|
| Stock | — | 93 | 116 | |
| Stage 1 | S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune) | 105 | 128 | Open → |
| Stage 2 | S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Screamin' Eagle SE8-462, S&S Cycle Quickee Adjustable Pushrods | 115 | 138 | Open → |
Best Cams for the CVO Milwaukee-Eight 117
Estimated rear-wheel output for every cam in our database on a CVO Milwaukee-Eight 117 with a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune (≈ 105 hp / 128 ft-lb before the cam).
| Cam | Character | Est. hp | Est. ft-lb | Gain |
|---|---|---|---|---|
| Screamin' Eagle SE8-517 | Top-end power | 120 | 136 | +15 hp / +8 ft-lb |
| S&S Cycle 550C | Top-end power | 120 | 136 | +15 hp / +8 ft-lb |
| S&S Cycle 590C | Top-end power | 120 | 133 | +15 hp / +5 ft-lb |
| Wood Performance WM8-777 | Top-end power | 119 | 137 | +14 hp / +9 ft-lb |
| Feuling Reaper 592 | Top-end power | 119 | 133 | +14 hp / +5 ft-lb |
| Screamin' Eagle SE8-511 | Mid-range | 118 | 137 | +13 hp / +9 ft-lb |
| Feuling Reaper 508 | Mid-range | 118 | 137 | +13 hp / +9 ft-lb |
| Wood Performance WM8-222 | Mid-range | 117 | 138 | +12 hp / +10 ft-lb |
| S&S Cycle 475C | Mid-range | 117 | 138 | +12 hp / +10 ft-lb |
| Feuling Reaper 521 | Low-end torque | 116 | 138 | +11 hp / +10 ft-lb |
| Cycle-Rama CR-460 | Mid-range | 116 | 138 | +11 hp / +10 ft-lb |
| Wood Performance WM8-22X | Low-end torque | 115 | 139 | +10 hp / +11 ft-lb |
| Screamin' Eagle SE8-462 | Low-end torque | 115 | 138 | +10 hp / +10 ft-lb |
| Andrews M460 | Low-end torque | 115 | 138 | +10 hp / +10 ft-lb |
| Zipper's Red Shift 468 | Mid-range | 115 | 137 | +10 hp / +9 ft-lb |
Want a side-by-side across all engines? See the Harley cam comparison chart.
Exhaust Options for the CVO Milwaukee-Eight 117
Estimated gain from each exhaust on a CVO Milwaukee-Eight 117 that already has a high-flow intake and a custom tune. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.
| Exhaust | Type | Est. gain |
|---|---|---|
| Vance & Hines Pro Pipe 2-into-1 | 2-into-1 · Power | +5 hp / +5 ft-lb |
| Vance & Hines Hi-Output 2-into-1 | 2-into-1 · Power | +5 hp / +5 ft-lb |
| Bassani Road Rage 2-into-1 | 2-into-1 · Power | +5 hp / +5 ft-lb |
| D&D Fat Cat 2-into-1 | 2-into-1 · Power | +5 hp / +6 ft-lb |
| Two Brothers Racing Comp-S 2-into-1 | 2-into-1 · Power | +5 hp / +5 ft-lb |
| S&S Cycle SuperStreet 2-into-1 | 2-into-1 · Power | +5 hp / +5 ft-lb |
| Rinehart Racing True Duals (2-into-2) | True duals · Sound | +3 hp / +3 ft-lb |
| Vance & Hines Eliminator 300 Slip-Ons | Slip-on · Sound | +2 hp / +3 ft-lb |
| Rinehart Racing 4" Slip-On Mufflers | Slip-on · Sound | +2 hp / +3 ft-lb |
| Screamin' Eagle Street Cannon Slip-Ons | Slip-on · Sound | +2 hp / +3 ft-lb |
| Vance & Hines Big Shots Long (2-into-2) | Drag pipes · Sound | +1 hp / -1 ft-lb |
CVO Milwaukee-Eight 117 FAQ
How much horsepower does a stock CVO Milwaukee-Eight 117 make?
A healthy stock CVO Milwaukee-Eight 117 makes roughly 93 hp and 116 ft-lb of torque at the rear wheel. Factory figures are measured at the crankshaft, so they're higher than what a dyno shows at the wheel.
How much horsepower does a Stage 1 CVO Milwaukee-Eight 117 make?
A Stage 1 CVO Milwaukee-Eight 117 (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 105 hp and 128 ft-lb at the rear wheel, about 12 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1 and Dynojet Power Vision 3 (custom dyno tune).
How much horsepower does a Stage 2 CVO Milwaukee-Eight 117 make?
A Stage 2 CVO Milwaukee-Eight 117 (Stage 1 plus a performance cam) makes roughly 115 hp and 138 ft-lb at the rear wheel, about 22 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Screamin' Eagle SE8-462 and S&S Cycle Quickee Adjustable Pushrods.
How much horsepower does a cam add to a CVO Milwaukee-Eight 117?
On top of a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, a cam takes a CVO Milwaukee-Eight 117 to roughly 115–120 hp depending on the grind. In our estimates the Screamin' Eagle SE8-517 makes the most peak power (≈ 120 hp) and the Wood Performance WM8-22X makes the most torque (≈ 139 ft-lb).
Does a CVO Milwaukee-Eight 117 need a tune after an exhaust or air cleaner?
Yes. A freer intake or exhaust makes a fuel-injected engine run lean on the stock tune, which costs power and adds heat. A tuner like the Dynojet Power Vision with a custom dyno tune gets the full gain.
Other Engines
Build it with Arch Customs
Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.
Start from intake, exhaust & tune →