Mon–Fri 9am–5pm · (902) 755-6532

Milwaukee-Eight · 2020–present

Screamin' Eagle 131 Crate Engine Horsepower Calculator

Harley-Davidson rates the Screamin' Eagle 131 Crate Engine at 121 hp and 131 ft-lb at the rear wheel, with Screamin' Eagle Street Cannon mufflers and a Pro Street Tuner calibration. Cycle World's dyno test of an installed engine matched that, so it's our starting point. Bolt-in replacement for 2017-and-later Touring models, in oil-cooled and Twin-Cooled versions (not Trikes). Add a different exhaust, air cleaner or a custom dyno tune to estimate what your build will make.

As installed
121 hp
131 ft-lb
Stage 1
131 hp
139 ft-lb
121 hp / 131 ft-lbDetails ↓

1Choose your engine

Bolt-in replacement for 2017-and-later Touring models, in oil-cooled and Twin-Cooled versions (not Trikes).

2Your parts

Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.

Quick start with a stage

Fills in a typical parts list for that stage. You can change any part afterwards.

Air intake

A high-flow air cleaner lets the engine breathe.

Exhaust

2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.

EFI tuner

Required on fuel-injected bikes once you change intake, exhaust or internals.

Supporting parts

No horsepower on their own, but they keep a modified engine reliable.

Barnett Heavy-Duty Clutch SpringHolds the extra torque so the clutch doesn't slip.

Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.

Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.

Estimated power curve

An illustration of where your Screamin' Eagle 131 Crate Engine makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.

Stock

Horsepower

hp at the rear wheel
204060801001201402,0002,5003,0003,5004,0004,5005,0005,5006,000Stock 121

Torque

ft-lb at the rear wheel
901001101201301402,0002,5003,0003,5004,0004,5005,0005,5006,000Stock 106

Add parts or pick a stage above to compare your build with stock.

Screamin' Eagle 131 Crate Engine Stage 1 Horsepower

Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.

StageTypical partsEst. hpEst. ft-lb
As installed—121131
Stage 1S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune)131139Open →

Exhaust Options for the Screamin' Eagle 131 Crate Engine

Estimated gain from each exhaust on a Screamin' Eagle 131 Crate Engine that already has a high-flow intake and a custom tune. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.

ExhaustTypeEst. gain
Vance & Hines Pro Pipe 2-into-12-into-1 · Power+4 hp / +3 ft-lb
Vance & Hines Hi-Output 2-into-12-into-1 · Power+4 hp / +3 ft-lb
Bassani Road Rage 2-into-12-into-1 · Power+4 hp / +3 ft-lb
D&D Fat Cat 2-into-12-into-1 · Power+4 hp / +4 ft-lb
Two Brothers Racing Comp-S 2-into-12-into-1 · Power+4 hp / +3 ft-lb
S&S Cycle SuperStreet 2-into-12-into-1 · Power+4 hp / +3 ft-lb
Rinehart Racing True Duals (2-into-2)True duals · Sound+1 hp / 0 ft-lb
Vance & Hines Eliminator 300 Slip-OnsSlip-on · Sound0 hp / 0 ft-lb
Rinehart Racing 4" Slip-On MufflersSlip-on · Sound0 hp / 0 ft-lb
Screamin' Eagle Street Cannon Slip-OnsSlip-on · Sound0 hp / 0 ft-lb
Vance & Hines Big Shots Long (2-into-2)Drag pipes · Sound-1 hp / -4 ft-lb

Screamin' Eagle 131 Crate Engine FAQ

How much horsepower does the Screamin' Eagle 131 Crate Engine make?

Harley-Davidson rates the Screamin' Eagle 131 Crate Engine at 121 hp and 131 ft-lb at the rear wheel, with Screamin' Eagle Street Cannon mufflers and a Pro Street Tuner calibration. Cycle World's dyno test of an installed engine matched that, so it's our starting point. Unlike most factory figures, Harley's crate engine numbers are rear-wheel, not crankshaft.

How much horsepower does a Stage 1 Screamin' Eagle 131 Crate Engine make?

A Stage 1 Screamin' Eagle 131 Crate Engine (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 131 hp and 139 ft-lb at the rear wheel, about 10 hp more than as installed. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1 and Dynojet Power Vision 3 (custom dyno tune).

Does a Screamin' Eagle 131 Crate Engine need a tune after an exhaust or air cleaner?

Yes. The crate engine already needs a Pro Street Tuner calibration, and that calibration is built around Harley's specified air cleaner and mufflers. Any other intake or exhaust needs a re-tune, and a custom dyno tune gets the full gain.

Can I add a cam or heads to the Screamin' Eagle 131 Crate Engine?

There's no need. It comes with an SE8-517 cam, CNC-ported Extreme heads with 1 mm larger valves, 10.7:1 forged pistons, a 64 mm throttle body and 5.5 g/s injectors. The gains left are in the exhaust, intake and a custom dyno tune for your exact bike.

What does the Screamin' Eagle 131 Crate Engine fit?

It's a bolt-in replacement for 2017-and-later Touring models, in oil-cooled and Twin-Cooled versions (not Trikes). It needs ECM recalibration with the Screamin' Eagle Pro Street Tuner, and we confirm fitment for your exact bike before anything is ordered.

Other Engines

Build it with Arch Customs

Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.

Start from intake, exhaust & tune →
(902) 755-6532
Book Service