Mon–Fri 9am–5pm · (902) 755-6532

Shovelhead · 1966–1980

Shovelhead 74 Horsepower Calculator

A stock Shovelhead 74 makes about 41 hp and 51 ft-lb at the rear wheel. Found in the FLH, FX and Super Glide. Add the parts on your bike and the ones you're considering to estimate what your build will make.

Stock
41 hp
51 ft-lb
Stage 1
46 hp
55 ft-lb
Stage 2
51 hp
59 ft-lb
41 hp / 51 ft-lbDetails ↓

1Choose your engine

FLH, FX and Super Glide.

2Your parts

Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.

Quick start with a stage

Fills in a typical parts list for that stage. You can change any part afterwards.

Air intake

A high-flow air cleaner lets the engine breathe.

Exhaust

2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.

Carburetor & jetting

Carbureted engines need re-jetting or a performance carb to match breathing mods.

Ignition

Programmable ignition lets us set timing to suit your build.

Camshaft

The single biggest bolt-in change to how your engine pulls.

Supporting parts

No horsepower on their own, but they keep a modified engine reliable.

Barnett Heavy-Duty Clutch SpringHolds the extra torque so the clutch doesn't slip.

Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.

Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.

Estimated power curve

An illustration of where your Shovelhead 74 makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.

Stock

Horsepower

hp at the rear wheel
10203040502,0002,5003,0003,5004,0004,500Stock 41

Torque

ft-lb at the rear wheel
404550552,0002,5003,0003,5004,0004,500Stock 44

Add parts or pick a stage above to compare your build with stock.

Shovelhead 74 Stage 1 & 2 Horsepower

Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.

StageTypical partsEst. hpEst. ft-lb
Stock—4151
Stage 1S&S Cycle Teardrop (for S&S carbs), Thunderheader 2-into-1, S&S Cycle Super E4655Open →
Stage 2S&S Cycle Teardrop (for S&S carbs), Thunderheader 2-into-1, S&S Cycle Super E, Andrews B Grind5159Open →

Best Cams for the Shovelhead 74

Estimated rear-wheel output for every cam in our database on a Shovelhead 74 with a high-flow air cleaner, a 2-into-1 exhaust and a performance carburetor (≈ 46 hp / 55 ft-lb before the cam).

CamCharacterEst. hpEst. ft-lbGain
Andrews B GrindMid-range5159+5 hp / +4 ft-lb
Andrews A GrindLow-end torque5059+4 hp / +4 ft-lb

Want a side-by-side across all engines? See the Harley cam comparison chart.

Exhaust Options for the Shovelhead 74

Estimated gain from each exhaust on a Shovelhead 74 that already has a high-flow intake and carb work. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.

ExhaustTypeEst. gain
Thunderheader 2-into-12-into-1 · Classic+2 hp / +2 ft-lb

Shovelhead 74 FAQ

How much horsepower does a stock Shovelhead 74 make?

A healthy stock Shovelhead 74 makes roughly 41 hp and 51 ft-lb of torque at the rear wheel. Factory figures are measured at the crankshaft, so they're higher than what a dyno shows at the wheel.

How much horsepower does a Stage 1 Shovelhead 74 make?

A Stage 1 Shovelhead 74 (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 46 hp and 55 ft-lb at the rear wheel, about 5 hp more than stock. A typical parts list is the S&S Cycle Teardrop (for S&S carbs), Thunderheader 2-into-1 and S&S Cycle Super E.

How much horsepower does a Stage 2 Shovelhead 74 make?

A Stage 2 Shovelhead 74 (Stage 1 plus a performance cam) makes roughly 51 hp and 59 ft-lb at the rear wheel, about 10 hp more than stock. A typical parts list is the S&S Cycle Teardrop (for S&S carbs), Thunderheader 2-into-1, S&S Cycle Super E and Andrews B Grind.

How much horsepower does a cam add to a Shovelhead 74?

On top of a high-flow air cleaner, a 2-into-1 exhaust and a performance carburetor, a cam takes a Shovelhead 74 to roughly 50–51 hp depending on the grind. In our estimates the Andrews B Grind makes the most peak power (≈ 51 hp) and the Andrews B Grind makes the most torque (≈ 59 ft-lb).

Does a Shovelhead 74 need a tune after an exhaust or air cleaner?

Yes. A carbureted engine needs re-jetting, or a performance carb like an S&S Super E, to match a freer intake and exhaust. Otherwise it runs lean.

Other Engines

Build it with Arch Customs

Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.

Start from intake, exhaust & tune →
(902) 755-6532
Book Service