Mon–Fri 9am–5pm · (902) 755-6532

Twin Cam · 2007–2017

Twin Cam 110 Horsepower Calculator

A stock Twin Cam 110 makes about 88 hp and 100 ft-lb at the rear wheel. Found in the CVO and Screamin' Eagle models, Breakout and Fat Boy S. Add the parts on your bike and the ones you're considering to estimate what your build will make.

Stock
88 hp
100 ft-lb
Stage 1
99 hp
110 ft-lb
Stage 2
111 hp
121 ft-lb
88 hp / 100 ft-lbDetails ↓

1Choose your engine

CVO and Screamin' Eagle models, Breakout and Fat Boy S.

2Your parts

Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.

Quick start with a stage

Fills in a typical parts list for that stage. You can change any part afterwards.

Air intake

A high-flow air cleaner lets the engine breathe.

Exhaust

2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.

EFI tuner

Required on fuel-injected bikes once you change intake, exhaust or internals.

Camshaft

The single biggest bolt-in change to how your engine pulls.

Cylinder heads

Better airflow through the heads. Pays off most with a cam or big bore.

Throttle body

More airflow for big-inch and ported-head builds.

Supporting parts

No horsepower on their own, but they keep a modified engine reliable.

Feuling Hydraulic Cam Tensioner ConversionReplaces the wear-prone stock shoe tensioners.
S&S Cycle Cam Support Plate (hydraulic tensioners)Upgraded cam plate with hydraulic tensioners.
S&S Cycle Quickee Adjustable PushrodsLets us install cams without pulling the rocker boxes.
Feuling Race Series Adjustable PushrodsStiff, adjustable pushrods for performance cams.
Feuling HP+ LiftersHigh-performance lifters for higher-lift cams.
Feuling HP+ Oil PumpImproved oil pressure and scavenging for built engines.
Barnett Heavy-Duty Clutch SpringHolds the extra torque so the clutch doesn't slip.

Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.

Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.

Estimated power curve

An illustration of where your Twin Cam 110 makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.

Stock

Horsepower

hp at the rear wheel
204060801002,0002,5003,0003,5004,0004,5005,0005,500Stock 88

Torque

ft-lb at the rear wheel
75808590951001052,0002,5003,0003,5004,0004,5005,0005,500Stock 84

Add parts or pick a stage above to compare your build with stock.

Twin Cam 110 Stage 1 & 2 Horsepower

Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.

StageTypical partsEst. hpEst. ft-lb
Stock—88100
Stage 1S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune)99110Open →
Stage 2S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Feuling Hydraulic Cam Tensioner Conversion, S&S Cycle Quickee Adjustable Pushrods111121Open →

Best Cams for the Twin Cam 110

Estimated rear-wheel output for every cam in our database on a Twin Cam 110 with a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune (≈ 99 hp / 110 ft-lb before the cam). Twin Cam estimates are calibrated against Fuel Moto's back-to-back Twin Cam 103 camshaft shootout.

CamCharacterEst. hpEst. ft-lbGain
Wood Performance TW-999-6aTop-end power114122+15 hp / +12 ft-lb
Wood Performance TW-777Mid-range112122+13 hp / +12 ft-lb
S&S Cycle 570Mid-range112120+13 hp / +10 ft-lb
Wood Performance TW-222Low-end torque111121+12 hp / +11 ft-lb
Wood Performance TW-555Mid-range111122+12 hp / +12 ft-lb
S&S Cycle MR103All-round111122+12 hp / +12 ft-lb
S&S Cycle 585Top-end power111118+12 hp / +8 ft-lb
Feuling 543Mid-range111118+12 hp / +8 ft-lb
Feuling 574Top-end power111118+12 hp / +8 ft-lb
Screamin' Eagle SE-259EMid-range111118+12 hp / +8 ft-lb
Feuling 525Low-end torque110117+11 hp / +7 ft-lb
Andrews 57HMid-range110119+11 hp / +9 ft-lb
Andrews TW37Mid-range110118+11 hp / +8 ft-lb
Andrews 48HLow-end torque109122+10 hp / +12 ft-lb
Zipper's Red Shift 527Low-end torque109120+10 hp / +10 ft-lb
Zipper's Red Shift 575Mid-range109120+10 hp / +10 ft-lb
Cycle-Rama 570-2Low-end torque109121+10 hp / +11 ft-lb
Cycle-Rama 575Mid-range109119+10 hp / +9 ft-lb
S&S Cycle 583Low-end torque107120+8 hp / +10 ft-lb
Screamin' Eagle SE-255Low-end torque106118+7 hp / +8 ft-lb
S&S Cycle 551Low-end torque105121+6 hp / +11 ft-lb
Andrews TW26Low-end torque105118+6 hp / +8 ft-lb
Screamin' Eagle SE-204Low-end torque105118+6 hp / +8 ft-lb
Zipper's Red Shift 525Low-end torque103120+4 hp / +10 ft-lb

Want a side-by-side across all engines? See the Harley cam comparison chart.

Exhaust Options for the Twin Cam 110

Estimated gain from each exhaust on a Twin Cam 110 that already has a high-flow intake and a custom tune. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.

ExhaustTypeEst. gain
Vance & Hines Pro Pipe 2-into-12-into-1 · Power+5 hp / +4 ft-lb
Vance & Hines Hi-Output 2-into-12-into-1 · Power+5 hp / +4 ft-lb
Bassani Road Rage 2-into-12-into-1 · Power+5 hp / +4 ft-lb
D&D Fat Cat 2-into-12-into-1 · Power+5 hp / +5 ft-lb
Two Brothers Racing Comp-S 2-into-12-into-1 · Power+5 hp / +4 ft-lb
S&S Cycle SuperStreet 2-into-12-into-1 · Power+5 hp / +4 ft-lb
Thunderheader 2-into-12-into-1 · Classic+5 hp / +4 ft-lb
Rinehart Racing True Duals (2-into-2)True duals · Sound+3 hp / +2 ft-lb
Vance & Hines Eliminator 300 Slip-OnsSlip-on · Sound+2 hp / +2 ft-lb
Rinehart Racing 4" Slip-On MufflersSlip-on · Sound+2 hp / +2 ft-lb
Screamin' Eagle Street Cannon Slip-OnsSlip-on · Sound+2 hp / +2 ft-lb
Vance & Hines Big Shots Long (2-into-2)Drag pipes · Sound+1 hp / -1 ft-lb

Twin Cam 110 FAQ

How much horsepower does a stock Twin Cam 110 make?

A healthy stock Twin Cam 110 makes roughly 88 hp and 100 ft-lb of torque at the rear wheel. Factory figures are measured at the crankshaft, so they're higher than what a dyno shows at the wheel.

How much horsepower does a Stage 1 Twin Cam 110 make?

A Stage 1 Twin Cam 110 (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 99 hp and 110 ft-lb at the rear wheel, about 11 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1 and Dynojet Power Vision 3 (custom dyno tune).

How much horsepower does a Stage 2 Twin Cam 110 make?

A Stage 2 Twin Cam 110 (Stage 1 plus a performance cam) makes roughly 111 hp and 121 ft-lb at the rear wheel, about 23 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Feuling Hydraulic Cam Tensioner Conversion and S&S Cycle Quickee Adjustable Pushrods.

How much horsepower does a cam add to a Twin Cam 110?

On top of a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, a cam takes a Twin Cam 110 to roughly 103–114 hp depending on the grind. In our estimates the Wood Performance TW-999-6a makes the most peak power (≈ 114 hp) and the Wood Performance TW-999-6a makes the most torque (≈ 122 ft-lb).

Does a Twin Cam 110 need a tune after an exhaust or air cleaner?

Yes. A freer intake or exhaust makes a fuel-injected engine run lean on the stock tune, which costs power and adds heat. A tuner like the Dynojet Power Vision with a custom dyno tune gets the full gain.

Other Engines

Build it with Arch Customs

Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.

Start from intake, exhaust & tune →
(902) 755-6532
Book Service