Milwaukee-Eight · 2023–present
Screamin' Eagle 135 Stage IV Crate Engine Horsepower Calculator
Harley-Davidson rates the Screamin' Eagle 135 Stage IV Crate Engine at 130 hp and 143 ft-lb at the rear wheel, with a Screamin' Eagle Ventilator Extreme air cleaner, Street Cannon mufflers and a Pro Street Tuner calibration. Cycle World's dyno test of an installed engine measured 126 hp and 141 ft-lb, so we start from that. Bolt-in replacement for 2021-and-later Touring models, in oil-cooled and Twin-Cooled versions (not Trikes). Add a different exhaust, air cleaner or a custom dyno tune to estimate what your build will make.
1Choose your engine
Bolt-in replacement for 2021-and-later Touring models, in oil-cooled and Twin-Cooled versions (not Trikes).
2Your parts
Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.
Fills in a typical parts list for that stage. You can change any part afterwards.
Air intake
A high-flow air cleaner lets the engine breathe.
Exhaust
2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.
EFI tuner
Required on fuel-injected bikes once you change intake, exhaust or internals.
Supporting parts
No horsepower on their own, but they keep a modified engine reliable.
Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.
Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.
Estimated power curve
An illustration of where your Screamin' Eagle 135 Stage IV Crate Engine makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.
Horsepower
hp at the rear wheelTorque
ft-lb at the rear wheelAdd parts or pick a stage above to compare your build with stock.
Screamin' Eagle 135 Stage IV Crate Engine Stage 1 Horsepower
Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.
| Stage | Typical parts | Est. hp | Est. ft-lb | |
|---|---|---|---|---|
| As installed | — | 126 | 141 | |
| Stage 1 | S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune) | 132 | 145 | Open → |
Exhaust Options for the Screamin' Eagle 135 Stage IV Crate Engine
Estimated gain from each exhaust on a Screamin' Eagle 135 Stage IV Crate Engine that already has a high-flow intake and a custom tune. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.
| Exhaust | Type | Est. gain |
|---|---|---|
| Vance & Hines Pro Pipe 2-into-1 | 2-into-1 · Power | +4 hp / +3 ft-lb |
| Vance & Hines Hi-Output 2-into-1 | 2-into-1 · Power | +4 hp / +3 ft-lb |
| Bassani Road Rage 2-into-1 | 2-into-1 · Power | +4 hp / +3 ft-lb |
| D&D Fat Cat 2-into-1 | 2-into-1 · Power | +4 hp / +5 ft-lb |
| Two Brothers Racing Comp-S 2-into-1 | 2-into-1 · Power | +4 hp / +3 ft-lb |
| S&S Cycle SuperStreet 2-into-1 | 2-into-1 · Power | +4 hp / +3 ft-lb |
| Rinehart Racing True Duals (2-into-2) | True duals · Sound | +2 hp / 0 ft-lb |
| Vance & Hines Eliminator 300 Slip-Ons | Slip-on · Sound | 0 hp / 0 ft-lb |
| Rinehart Racing 4" Slip-On Mufflers | Slip-on · Sound | 0 hp / 0 ft-lb |
| Screamin' Eagle Street Cannon Slip-Ons | Slip-on · Sound | 0 hp / 0 ft-lb |
| Vance & Hines Big Shots Long (2-into-2) | Drag pipes · Sound | -1 hp / -4 ft-lb |
Screamin' Eagle 135 Stage IV Crate Engine FAQ
How much horsepower does the Screamin' Eagle 135 Stage IV Crate Engine make?
Harley-Davidson rates the Screamin' Eagle 135 Stage IV Crate Engine at 130 hp and 143 ft-lb at the rear wheel, with a Screamin' Eagle Ventilator Extreme air cleaner, Street Cannon mufflers and a Pro Street Tuner calibration. Cycle World's dyno test of an installed engine measured 126 hp and 141 ft-lb, so we start from that. Unlike most factory figures, Harley's crate engine numbers are rear-wheel, not crankshaft.
How much horsepower does a Stage 1 Screamin' Eagle 135 Stage IV Crate Engine make?
A Stage 1 Screamin' Eagle 135 Stage IV Crate Engine (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 132 hp and 145 ft-lb at the rear wheel, about 6 hp more than as installed. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1 and Dynojet Power Vision 3 (custom dyno tune).
Does a Screamin' Eagle 135 Stage IV Crate Engine need a tune after an exhaust or air cleaner?
Yes. The crate engine already needs a Pro Street Tuner calibration, and that calibration is built around Harley's specified air cleaner and mufflers. Any other intake or exhaust needs a re-tune, and a custom dyno tune gets the full gain.
Can I add a cam or heads to the Screamin' Eagle 135 Stage IV Crate Engine?
There's no need. It comes with an SE8-517 cam, CNC-ported Extreme heads, a 4.625-inch stroke, 10.7:1 forged pistons, a 68 mm throttle body and 6.8 g/s injectors. The gains left are in the exhaust, intake and a custom dyno tune for your exact bike.
What does the Screamin' Eagle 135 Stage IV Crate Engine fit?
It's a bolt-in replacement for 2021-and-later Touring models, in oil-cooled and Twin-Cooled versions (not Trikes). It needs ECM recalibration with the Screamin' Eagle Pro Street Tuner, and we confirm fitment for your exact bike before anything is ordered.
Other Engines
Build it with Arch Customs
Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.
Start from intake, exhaust & tune →