Mon–Fri 9am–5pm · (902) 755-6532

Twin Cam · 1999–2006

Twin Cam 88 Horsepower Calculator

A stock Twin Cam 88 makes about 63 hp and 73 ft-lb at the rear wheel. Found in the Touring, Softail and Dyna (carbureted or fuel-injected). Add the parts on your bike and the ones you're considering to estimate what your build will make.

Stock
63 hp
73 ft-lb
Stage 1
71 hp
81 ft-lb
Stage 2
79 hp
89 ft-lb
Stage 3
86 hp
96 ft-lb
63 hp / 73 ft-lbDetails ↓

1Choose your engine

Touring, Softail and Dyna (carbureted or fuel-injected).

2Your parts

Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.

Quick start with a stage

Fills in a typical parts list for that stage. You can change any part afterwards.

Air intake

A high-flow air cleaner lets the engine breathe.

Exhaust

2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.

EFI tuner

Required on fuel-injected bikes once you change intake, exhaust or internals.

Camshaft

The single biggest bolt-in change to how your engine pulls.

Big bore / stroker kit

More displacement means more power and torque everywhere.

Cylinder heads

Better airflow through the heads. Pays off most with a cam or big bore.

Throttle body

More airflow for big-inch and ported-head builds.

Supporting parts

No horsepower on their own, but they keep a modified engine reliable.

Feuling Hydraulic Cam Tensioner ConversionReplaces the wear-prone stock shoe tensioners.
S&S Cycle Cam Support Plate (hydraulic tensioners)Upgraded cam plate with hydraulic tensioners.
S&S Cycle Quickee Adjustable PushrodsLets us install cams without pulling the rocker boxes.
Feuling Race Series Adjustable PushrodsStiff, adjustable pushrods for performance cams.
Feuling HP+ LiftersHigh-performance lifters for higher-lift cams.
Feuling HP+ Oil PumpImproved oil pressure and scavenging for built engines.
Barnett Heavy-Duty Clutch SpringHolds the extra torque so the clutch doesn't slip.

Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.

Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.

Estimated power curve

An illustration of where your Twin Cam 88 makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.

Stock

Horsepower

hp at the rear wheel
2030405060702,0002,5003,0003,5004,0004,5005,0005,500Stock 63

Torque

ft-lb at the rear wheel
5560657075802,0002,5003,0003,5004,0004,5005,0005,500Stock 60

Add parts or pick a stage above to compare your build with stock.

Twin Cam 88 Stage 1, 2, 3 & 4 Horsepower

Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.

StageTypical partsEst. hpEst. ft-lb
Stock—6373
Stage 1S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune)7181Open →
Stage 2S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Feuling Hydraulic Cam Tensioner Conversion, S&S Cycle Quickee Adjustable Pushrods7989Open →
Stage 3S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Screamin' Eagle 95 Big Bore Kit, Feuling Hydraulic Cam Tensioner Conversion, S&S Cycle Quickee Adjustable Pushrods, Barnett Heavy-Duty Clutch Spring8696Open →
Stage 4S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Screamin' Eagle 95 Big Bore Kit, Screamin' Eagle CNC-Ported Heads, Feuling Hydraulic Cam Tensioner Conversion, S&S Cycle Quickee Adjustable Pushrods, Barnett Heavy-Duty Clutch Spring9199Open →

Best Cams for the Twin Cam 88

Estimated rear-wheel output for every cam in our database on a Twin Cam 88 with a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune (≈ 71 hp / 81 ft-lb before the cam). Twin Cam estimates are calibrated against Fuel Moto's back-to-back Twin Cam 103 camshaft shootout.

CamCharacterEst. hpEst. ft-lbGain
Wood Performance TW-555Mid-range8089+9 hp / +8 ft-lb
Wood Performance TW-777Mid-range8089+9 hp / +8 ft-lb
S&S Cycle 570Mid-range8087+9 hp / +6 ft-lb
Feuling 574Top-end power8086+9 hp / +5 ft-lb
Wood Performance TW-222Low-end torque7989+8 hp / +8 ft-lb
Wood Performance TW-999-6aTop-end power7987+8 hp / +6 ft-lb
S&S Cycle MR103All-round7989+8 hp / +8 ft-lb
Feuling 525Low-end torque7985+8 hp / +4 ft-lb
Feuling 543Mid-range7986+8 hp / +5 ft-lb
Andrews 57HMid-range7987+8 hp / +6 ft-lb
Andrews TW37Mid-range7986+8 hp / +5 ft-lb
S&S Cycle 585Top-end power7885+7 hp / +4 ft-lb
Andrews 48HLow-end torque7889+7 hp / +8 ft-lb
Zipper's Red Shift 527Low-end torque7888+7 hp / +7 ft-lb
Zipper's Red Shift 575Mid-range7888+7 hp / +7 ft-lb
Cycle-Rama 570-2Low-end torque7888+7 hp / +7 ft-lb
Cycle-Rama 575Mid-range7887+7 hp / +6 ft-lb
Screamin' Eagle SE-259EMid-range7885+7 hp / +4 ft-lb
S&S Cycle 583Low-end torque7688+5 hp / +7 ft-lb
Screamin' Eagle SE-255Low-end torque7686+5 hp / +5 ft-lb
S&S Cycle 551Low-end torque7589+4 hp / +8 ft-lb
Andrews TW26Low-end torque7586+4 hp / +5 ft-lb
Screamin' Eagle SE-204Low-end torque7586+4 hp / +5 ft-lb
Zipper's Red Shift 525Low-end torque7487+3 hp / +6 ft-lb

Want a side-by-side across all engines? See the Harley cam comparison chart.

Exhaust Options for the Twin Cam 88

Estimated gain from each exhaust on a Twin Cam 88 that already has a high-flow intake and a custom tune. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.

ExhaustTypeEst. gain
Vance & Hines Pro Pipe 2-into-12-into-1 · Power+4 hp / +4 ft-lb
Vance & Hines Hi-Output 2-into-12-into-1 · Power+4 hp / +4 ft-lb
Bassani Road Rage 2-into-12-into-1 · Power+4 hp / +4 ft-lb
D&D Fat Cat 2-into-12-into-1 · Power+4 hp / +4 ft-lb
Two Brothers Racing Comp-S 2-into-12-into-1 · Power+4 hp / +4 ft-lb
S&S Cycle SuperStreet 2-into-12-into-1 · Power+4 hp / +4 ft-lb
Thunderheader 2-into-12-into-1 · Classic+4 hp / +4 ft-lb
Rinehart Racing True Duals (2-into-2)True duals · Sound+3 hp / +2 ft-lb
Vance & Hines Eliminator 300 Slip-OnsSlip-on · Sound+2 hp / +2 ft-lb
Rinehart Racing 4" Slip-On MufflersSlip-on · Sound+2 hp / +2 ft-lb
Screamin' Eagle Street Cannon Slip-OnsSlip-on · Sound+2 hp / +2 ft-lb
Vance & Hines Big Shots Long (2-into-2)Drag pipes · Sound+1 hp / 0 ft-lb

Twin Cam 88 Big Bore Kits

Estimated output with the kit, a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, and a matched torque cam.

KitDisplacementEst. hpEst. ft-lb
Screamin' Eagle 95 Big Bore Kit + Wood Performance TW-22288 → 95 ci8696

Twin Cam 88 FAQ

How much horsepower does a stock Twin Cam 88 make?

A healthy stock Twin Cam 88 makes roughly 63 hp and 73 ft-lb of torque at the rear wheel. Factory figures are measured at the crankshaft, so they're higher than what a dyno shows at the wheel.

How much horsepower does a Stage 1 Twin Cam 88 make?

A Stage 1 Twin Cam 88 (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 71 hp and 81 ft-lb at the rear wheel, about 8 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1 and Dynojet Power Vision 3 (custom dyno tune).

How much horsepower does a Stage 2 Twin Cam 88 make?

A Stage 2 Twin Cam 88 (Stage 1 plus a performance cam) makes roughly 79 hp and 89 ft-lb at the rear wheel, about 16 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Feuling Hydraulic Cam Tensioner Conversion and S&S Cycle Quickee Adjustable Pushrods.

How much horsepower does a Stage 3 Twin Cam 88 make?

A Stage 3 Twin Cam 88 (Stage 2 plus a big bore kit) makes roughly 86 hp and 96 ft-lb at the rear wheel, about 23 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Screamin' Eagle 95 Big Bore Kit, Feuling Hydraulic Cam Tensioner Conversion, S&S Cycle Quickee Adjustable Pushrods and Barnett Heavy-Duty Clutch Spring.

How much horsepower does a cam add to a Twin Cam 88?

On top of a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, a cam takes a Twin Cam 88 to roughly 74–80 hp depending on the grind. In our estimates the Wood Performance TW-555 makes the most peak power (≈ 80 hp) and the Wood Performance TW-555 makes the most torque (≈ 89 ft-lb).

Does a Twin Cam 88 need a tune after an exhaust or air cleaner?

Yes. A freer intake or exhaust makes a fuel-injected engine run lean on the stock tune, which costs power and adds heat. A tuner like the Dynojet Power Vision with a custom dyno tune gets the full gain.

Other Engines

Build it with Arch Customs

Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.

Start from intake, exhaust & tune →
(902) 755-6532
Book Service