Milwaukee-Eight · 2023–present
Milwaukee-Eight 121 VVT Horsepower Calculator
A stock Milwaukee-Eight 121 VVT makes about 101 hp and 120 ft-lb at the rear wheel. Found in the CVO Street Glide, CVO Road Glide and CVO Street Glide Limited. Add the parts on your bike and the ones you're considering to estimate what your build will make.
1Choose your engine
CVO Street Glide, CVO Road Glide and CVO Street Glide Limited.
2Your parts
Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.
Fills in a typical parts list for that stage. You can change any part afterwards.
Air intake
A high-flow air cleaner lets the engine breathe.
Exhaust
2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.
EFI tuner
Required on fuel-injected bikes once you change intake, exhaust or internals.
Supporting parts
No horsepower on their own, but they keep a modified engine reliable.
Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.
Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.
Estimated power curve
An illustration of where your Milwaukee-Eight 121 VVT makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.
Horsepower
hp at the rear wheelTorque
ft-lb at the rear wheelAdd parts or pick a stage above to compare your build with stock.
Milwaukee-Eight 121 VVT Stage 1 Horsepower
Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.
| Stage | Typical parts | Est. hp | Est. ft-lb | |
|---|---|---|---|---|
| Stock | — | 101 | 120 | |
| Stage 1 | S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune) | 114 | 132 | Open → |
Exhaust Options for the Milwaukee-Eight 121 VVT
Estimated gain from each exhaust on a Milwaukee-Eight 121 VVT that already has a high-flow intake and a custom tune. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.
| Exhaust | Type | Est. gain |
|---|---|---|
| Vance & Hines Pro Pipe 2-into-1 | 2-into-1 · Power | +6 hp / +5 ft-lb |
| Vance & Hines Hi-Output 2-into-1 | 2-into-1 · Power | +6 hp / +5 ft-lb |
| Bassani Road Rage 2-into-1 | 2-into-1 · Power | +6 hp / +5 ft-lb |
| D&D Fat Cat 2-into-1 | 2-into-1 · Power | +6 hp / +7 ft-lb |
| Two Brothers Racing Comp-S 2-into-1 | 2-into-1 · Power | +6 hp / +5 ft-lb |
| S&S Cycle SuperStreet 2-into-1 | 2-into-1 · Power | +6 hp / +5 ft-lb |
| Rinehart Racing True Duals (2-into-2) | True duals · Sound | +3 hp / +3 ft-lb |
| Vance & Hines Eliminator 300 Slip-Ons | Slip-on · Sound | +2 hp / +3 ft-lb |
| Rinehart Racing 4" Slip-On Mufflers | Slip-on · Sound | +2 hp / +3 ft-lb |
| Screamin' Eagle Street Cannon Slip-Ons | Slip-on · Sound | +2 hp / +3 ft-lb |
| Vance & Hines Big Shots Long (2-into-2) | Drag pipes · Sound | +1 hp / -1 ft-lb |
Milwaukee-Eight 121 VVT FAQ
How much horsepower does a stock Milwaukee-Eight 121 VVT make?
A healthy stock Milwaukee-Eight 121 VVT makes roughly 101 hp and 120 ft-lb of torque at the rear wheel. Factory figures are measured at the crankshaft, so they're higher than what a dyno shows at the wheel.
How much horsepower does a Stage 1 Milwaukee-Eight 121 VVT make?
A Stage 1 Milwaukee-Eight 121 VVT (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 114 hp and 132 ft-lb at the rear wheel, about 13 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1 and Dynojet Power Vision 3 (custom dyno tune).
Does a Milwaukee-Eight 121 VVT need a tune after an exhaust or air cleaner?
Yes. A freer intake or exhaust makes a fuel-injected engine run lean on the stock tune, which costs power and adds heat. A tuner like the Dynojet Power Vision with a custom dyno tune gets the full gain.
Can I put an aftermarket cam in a Milwaukee-Eight 121 VVT?
The Milwaukee-Eight 121 VVT uses variable valve timing (VVT). Most aftermarket cams, including the major Screamin' Eagle and Feuling kits, are listed as not fitting VVT engines, so cam work on a VVT engine needs to be planned case by case.
Other Engines
Build it with Arch Customs
Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.
Start from intake, exhaust & tune →