Mon–Fri 9am–5pm · (902) 755-6532

Twin Cam · 2007–2016

Twin Cam 96 Horsepower Calculator

A stock Twin Cam 96 makes about 69 hp and 82 ft-lb at the rear wheel. Found in the Touring, Softail and Dyna (Electra Glide, Road King, Heritage, Super Glide and more). Add the parts on your bike and the ones you're considering to estimate what your build will make.

Stock
69 hp
82 ft-lb
Stage 1
78 hp
90 ft-lb
Stage 2
87 hp
100 ft-lb
Stage 3
93 hp
107 ft-lb
69 hp / 82 ft-lbDetails ↓

1Choose your engine

Touring, Softail and Dyna (Electra Glide, Road King, Heritage, Super Glide and more).

2Your parts

Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.

Quick start with a stage

Fills in a typical parts list for that stage. You can change any part afterwards.

Air intake

A high-flow air cleaner lets the engine breathe.

Exhaust

2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.

EFI tuner

Required on fuel-injected bikes once you change intake, exhaust or internals.

Camshaft

The single biggest bolt-in change to how your engine pulls.

Big bore / stroker kit

More displacement means more power and torque everywhere.

Cylinder heads

Better airflow through the heads. Pays off most with a cam or big bore.

Throttle body

More airflow for big-inch and ported-head builds.

Supporting parts

No horsepower on their own, but they keep a modified engine reliable.

Feuling Hydraulic Cam Tensioner ConversionReplaces the wear-prone stock shoe tensioners.
S&S Cycle Cam Support Plate (hydraulic tensioners)Upgraded cam plate with hydraulic tensioners.
S&S Cycle Quickee Adjustable PushrodsLets us install cams without pulling the rocker boxes.
Feuling Race Series Adjustable PushrodsStiff, adjustable pushrods for performance cams.
Feuling HP+ LiftersHigh-performance lifters for higher-lift cams.
Feuling HP+ Oil PumpImproved oil pressure and scavenging for built engines.
Barnett Heavy-Duty Clutch SpringHolds the extra torque so the clutch doesn't slip.

Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.

Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.

Estimated power curve

An illustration of where your Twin Cam 96 makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.

Stock

Horsepower

hp at the rear wheel
203040506070802,0002,5003,0003,5004,0004,5005,0005,500Stock 69

Torque

ft-lb at the rear wheel
606570758085902,0002,5003,0003,5004,0004,5005,0005,500Stock 66

Add parts or pick a stage above to compare your build with stock.

Twin Cam 96 Stage 1, 2, 3 & 4 Horsepower

Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.

StageTypical partsEst. hpEst. ft-lb
Stock—6982
Stage 1S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune)7890Open →
Stage 2S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Feuling Hydraulic Cam Tensioner Conversion, S&S Cycle Quickee Adjustable Pushrods87100Open →
Stage 3S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Screamin' Eagle 103 Big Bore Kit, Feuling Hydraulic Cam Tensioner Conversion, S&S Cycle Quickee Adjustable Pushrods, Barnett Heavy-Duty Clutch Spring93107Open →
Stage 4S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Screamin' Eagle 103 Big Bore Kit, Screamin' Eagle CNC-Ported Heads, Feuling Hydraulic Cam Tensioner Conversion, S&S Cycle Quickee Adjustable Pushrods, Barnett Heavy-Duty Clutch Spring99111Open →

Best Cams for the Twin Cam 96

Estimated rear-wheel output for every cam in our database on a Twin Cam 96 with a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune (≈ 78 hp / 90 ft-lb before the cam). Twin Cam estimates are calibrated against Fuel Moto's back-to-back Twin Cam 103 camshaft shootout.

CamCharacterEst. hpEst. ft-lbGain
Wood Performance TW-777Mid-range88100+10 hp / +10 ft-lb
S&S Cycle 570Mid-range8898+10 hp / +8 ft-lb
Wood Performance TW-222Low-end torque87100+9 hp / +10 ft-lb
Wood Performance TW-555Mid-range87100+9 hp / +10 ft-lb
Wood Performance TW-999-6aTop-end power8798+9 hp / +8 ft-lb
S&S Cycle MR103All-round87100+9 hp / +10 ft-lb
Feuling 543Mid-range8797+9 hp / +7 ft-lb
Feuling 574Top-end power8796+9 hp / +6 ft-lb
Feuling 525Low-end torque8696+8 hp / +6 ft-lb
Andrews 48HLow-end torque86100+8 hp / +10 ft-lb
Andrews 57HMid-range8698+8 hp / +8 ft-lb
Andrews TW37Mid-range8697+8 hp / +7 ft-lb
Zipper's Red Shift 575Mid-range8698+8 hp / +8 ft-lb
Cycle-Rama 570-2Low-end torque8699+8 hp / +9 ft-lb
S&S Cycle 585Top-end power8596+7 hp / +6 ft-lb
Zipper's Red Shift 527Low-end torque8599+7 hp / +9 ft-lb
Cycle-Rama 575Mid-range8598+7 hp / +8 ft-lb
Screamin' Eagle SE-259EMid-range8596+7 hp / +6 ft-lb
S&S Cycle 583Low-end torque8499+6 hp / +9 ft-lb
Screamin' Eagle SE-255Low-end torque8397+5 hp / +7 ft-lb
S&S Cycle 551Low-end torque82100+4 hp / +10 ft-lb
Andrews TW26Low-end torque8297+4 hp / +7 ft-lb
Screamin' Eagle SE-204Low-end torque8297+4 hp / +7 ft-lb
Zipper's Red Shift 525Low-end torque8198+3 hp / +8 ft-lb

Want a side-by-side across all engines? See the Harley cam comparison chart.

Exhaust Options for the Twin Cam 96

Estimated gain from each exhaust on a Twin Cam 96 that already has a high-flow intake and a custom tune. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.

ExhaustTypeEst. gain
Vance & Hines Pro Pipe 2-into-12-into-1 · Power+4 hp / +3 ft-lb
Vance & Hines Hi-Output 2-into-12-into-1 · Power+4 hp / +3 ft-lb
Bassani Road Rage 2-into-12-into-1 · Power+4 hp / +3 ft-lb
D&D Fat Cat 2-into-12-into-1 · Power+4 hp / +4 ft-lb
Two Brothers Racing Comp-S 2-into-12-into-1 · Power+4 hp / +3 ft-lb
S&S Cycle SuperStreet 2-into-12-into-1 · Power+4 hp / +3 ft-lb
Thunderheader 2-into-12-into-1 · Classic+4 hp / +3 ft-lb
Rinehart Racing True Duals (2-into-2)True duals · Sound+2 hp / +2 ft-lb
Vance & Hines Big Shots Long (2-into-2)Drag pipes · Sound+1 hp / -1 ft-lb
Vance & Hines Eliminator 300 Slip-OnsSlip-on · Sound+1 hp / +2 ft-lb
Rinehart Racing 4" Slip-On MufflersSlip-on · Sound+1 hp / +2 ft-lb
Screamin' Eagle Street Cannon Slip-OnsSlip-on · Sound+1 hp / +2 ft-lb

Twin Cam 96 Big Bore Kits

Estimated output with the kit, a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, and a matched torque cam.

KitDisplacementEst. hpEst. ft-lb
Screamin' Eagle 103 Big Bore Kit + Wood Performance TW-22296 → 103 ci93107

Twin Cam 96 FAQ

How much horsepower does a stock Twin Cam 96 make?

A healthy stock Twin Cam 96 makes roughly 69 hp and 82 ft-lb of torque at the rear wheel. Factory figures are measured at the crankshaft, so they're higher than what a dyno shows at the wheel.

How much horsepower does a Stage 1 Twin Cam 96 make?

A Stage 1 Twin Cam 96 (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 78 hp and 90 ft-lb at the rear wheel, about 9 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1 and Dynojet Power Vision 3 (custom dyno tune).

How much horsepower does a Stage 2 Twin Cam 96 make?

A Stage 2 Twin Cam 96 (Stage 1 plus a performance cam) makes roughly 87 hp and 100 ft-lb at the rear wheel, about 18 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Feuling Hydraulic Cam Tensioner Conversion and S&S Cycle Quickee Adjustable Pushrods.

How much horsepower does a Stage 3 Twin Cam 96 make?

A Stage 3 Twin Cam 96 (Stage 2 plus a big bore kit) makes roughly 93 hp and 107 ft-lb at the rear wheel, about 24 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Wood Performance TW-222, Screamin' Eagle 103 Big Bore Kit, Feuling Hydraulic Cam Tensioner Conversion, S&S Cycle Quickee Adjustable Pushrods and Barnett Heavy-Duty Clutch Spring.

How much horsepower does a cam add to a Twin Cam 96?

On top of a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, a cam takes a Twin Cam 96 to roughly 81–88 hp depending on the grind. In our estimates the Wood Performance TW-777 makes the most peak power (≈ 88 hp) and the Wood Performance TW-777 makes the most torque (≈ 100 ft-lb).

Does a Twin Cam 96 need a tune after an exhaust or air cleaner?

Yes. A freer intake or exhaust makes a fuel-injected engine run lean on the stock tune, which costs power and adds heat. A tuner like the Dynojet Power Vision with a custom dyno tune gets the full gain.

Other Engines

Build it with Arch Customs

Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.

Start from intake, exhaust & tune →
(902) 755-6532
Book Service