Mon–Fri 9am–5pm · (902) 755-6532

Milwaukee-Eight · 2022–present

Milwaukee-Eight 117 Horsepower Calculator

A stock Milwaukee-Eight 117 makes about 93 hp and 116 ft-lb at the rear wheel. Found in the Factory 117 Touring and Softail models (Low Rider S and ST, Street Glide, Road Glide and more). Add the parts on your bike and the ones you're considering to estimate what your build will make.

Stock
93 hp
116 ft-lb
Stage 1
105 hp
128 ft-lb
Stage 2
115 hp
138 ft-lb
93 hp / 116 ft-lbDetails ↓

1Choose your engine

Factory 117 Touring and Softail models (Low Rider S and ST, Street Glide, Road Glide and more).

2Your parts

Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.

Quick start with a stage

Fills in a typical parts list for that stage. You can change any part afterwards.

Air intake

A high-flow air cleaner lets the engine breathe.

Exhaust

2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.

EFI tuner

Required on fuel-injected bikes once you change intake, exhaust or internals.

Camshaft

The single biggest bolt-in change to how your engine pulls.

Cylinder heads

Better airflow through the heads. Pays off most with a cam or big bore.

Throttle body

More airflow for big-inch and ported-head builds.

Supporting parts

No horsepower on their own, but they keep a modified engine reliable.

S&S Cycle Quickee Adjustable PushrodsLets us install cams without pulling the rocker boxes.
Feuling Race Series Adjustable PushrodsStiff, adjustable pushrods for performance cams.
Feuling HP+ LiftersHigh-performance lifters for higher-lift cams.
Feuling HP+ Oil PumpImproved oil pressure and scavenging for built engines.
Barnett Heavy-Duty Clutch SpringHolds the extra torque so the clutch doesn't slip.

Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.

Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.

Estimated power curve

An illustration of where your Milwaukee-Eight 117 makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.

Stock

Horsepower

hp at the rear wheel
204060801002,0002,5003,0003,5004,0004,5005,0005,500Stock 90

Torque

ft-lb at the rear wheel
7080901001101201302,0002,5003,0003,5004,0004,5005,0005,500Stock 83

Add parts or pick a stage above to compare your build with stock.

Milwaukee-Eight 117 Stage 1 & 2 Horsepower

Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.

StageTypical partsEst. hpEst. ft-lb
Stock—93116
Stage 1S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune)105128Open →
Stage 2S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Screamin' Eagle SE8-462, S&S Cycle Quickee Adjustable Pushrods115138Open →

Best Cams for the Milwaukee-Eight 117

Estimated rear-wheel output for every cam in our database on a Milwaukee-Eight 117 with a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune (≈ 105 hp / 128 ft-lb before the cam).

CamCharacterEst. hpEst. ft-lbGain
Screamin' Eagle SE8-517Top-end power120136+15 hp / +8 ft-lb
S&S Cycle 550CTop-end power120136+15 hp / +8 ft-lb
S&S Cycle 590CTop-end power120133+15 hp / +5 ft-lb
Wood Performance WM8-777Top-end power119137+14 hp / +9 ft-lb
Feuling Reaper 592Top-end power119133+14 hp / +5 ft-lb
Screamin' Eagle SE8-511Mid-range118137+13 hp / +9 ft-lb
Feuling Reaper 508Mid-range118137+13 hp / +9 ft-lb
Wood Performance WM8-222Mid-range117138+12 hp / +10 ft-lb
S&S Cycle 475CMid-range117138+12 hp / +10 ft-lb
Feuling Reaper 521Low-end torque116138+11 hp / +10 ft-lb
Cycle-Rama CR-460Mid-range116138+11 hp / +10 ft-lb
Wood Performance WM8-22XLow-end torque115139+10 hp / +11 ft-lb
Screamin' Eagle SE8-462Low-end torque115138+10 hp / +10 ft-lb
Andrews M460Low-end torque115138+10 hp / +10 ft-lb
Zipper's Red Shift 468Mid-range115137+10 hp / +9 ft-lb

Want a side-by-side across all engines? See the Harley cam comparison chart.

Exhaust Options for the Milwaukee-Eight 117

Estimated gain from each exhaust on a Milwaukee-Eight 117 that already has a high-flow intake and a custom tune. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.

ExhaustTypeEst. gain
Vance & Hines Pro Pipe 2-into-12-into-1 · Power+5 hp / +5 ft-lb
Vance & Hines Hi-Output 2-into-12-into-1 · Power+5 hp / +5 ft-lb
Bassani Road Rage 2-into-12-into-1 · Power+5 hp / +5 ft-lb
D&D Fat Cat 2-into-12-into-1 · Power+5 hp / +6 ft-lb
Two Brothers Racing Comp-S 2-into-12-into-1 · Power+5 hp / +5 ft-lb
S&S Cycle SuperStreet 2-into-12-into-1 · Power+5 hp / +5 ft-lb
Rinehart Racing True Duals (2-into-2)True duals · Sound+3 hp / +3 ft-lb
Vance & Hines Eliminator 300 Slip-OnsSlip-on · Sound+2 hp / +3 ft-lb
Rinehart Racing 4" Slip-On MufflersSlip-on · Sound+2 hp / +3 ft-lb
Screamin' Eagle Street Cannon Slip-OnsSlip-on · Sound+2 hp / +3 ft-lb
Vance & Hines Big Shots Long (2-into-2)Drag pipes · Sound+1 hp / -1 ft-lb

Milwaukee-Eight 117 FAQ

How much horsepower does a stock Milwaukee-Eight 117 make?

A healthy stock Milwaukee-Eight 117 makes roughly 93 hp and 116 ft-lb of torque at the rear wheel. Factory figures are measured at the crankshaft, so they're higher than what a dyno shows at the wheel.

How much horsepower does a Stage 1 Milwaukee-Eight 117 make?

A Stage 1 Milwaukee-Eight 117 (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 105 hp and 128 ft-lb at the rear wheel, about 12 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1 and Dynojet Power Vision 3 (custom dyno tune).

How much horsepower does a Stage 2 Milwaukee-Eight 117 make?

A Stage 2 Milwaukee-Eight 117 (Stage 1 plus a performance cam) makes roughly 115 hp and 138 ft-lb at the rear wheel, about 22 hp more than stock. A typical parts list is the S&S Cycle Stealth Air Cleaner, Vance & Hines Hi-Output 2-into-1, Dynojet Power Vision 3 (custom dyno tune), Screamin' Eagle SE8-462 and S&S Cycle Quickee Adjustable Pushrods.

How much horsepower does a cam add to a Milwaukee-Eight 117?

On top of a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, a cam takes a Milwaukee-Eight 117 to roughly 115–120 hp depending on the grind. In our estimates the Screamin' Eagle SE8-517 makes the most peak power (≈ 120 hp) and the Wood Performance WM8-22X makes the most torque (≈ 139 ft-lb).

Does a Milwaukee-Eight 117 need a tune after an exhaust or air cleaner?

Yes. A freer intake or exhaust makes a fuel-injected engine run lean on the stock tune, which costs power and adds heat. A tuner like the Dynojet Power Vision with a custom dyno tune gets the full gain.

Other Engines

Build it with Arch Customs

Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.

Start from intake, exhaust & tune →
(902) 755-6532
Book Service